[PATCH -mm][POWERPC] mpc8xxx : allow SPI without cs.

[Anton Vorontsov]

On Thu, Jun 18, 2009 at 08:19:44AM +0200, Rini van Zetten wrote:
> This patch adds the possibility to have a spi device without a cs.
>
> For example, the dts file should look something like this:
>
> spi-controller {
>        gpios = <&pio1 1 0      /* cs0 */
>                 0              /* cs1, no GPIO */
>                 &pio2 2 0>;    /* cs2 */
>

Interesting scheme. I guess this is for eSPI controllers that can
do their own chip-selects, but we want GPIO chip selects in addition
(or in place of built-in ones), correct?

> Signed-off-by: Rini van Zetten <rini at arvoo.nl>
> ---
> Changes :
> 	patch against 2.6.30-rc8-mm1

I assume this is v2 already, and I overlooked v1, sorry.

Technically the patch looks OK, but please fix some cosmetics issues.

checkpatch reports:

WARNING: patch prefix 'drivers' exists, appears to be a -p0 patch

WARNING: line over 80 characters
#131: FILE: spi/spi_mpc8xxx.c:714:
+                               dev_err(dev, "can't request gpio #%d: %d\n", i, ret);

WARNING: line over 80 characters
#141: FILE: spi/spi_mpc8xxx.c:724:
+                               dev_err(dev, "can't set output direction for gpio "

> --- drivers/spi/spi_mpc8xxx.c.org	2009-06-12 10:45:21.000000000 +0200
> +++ drivers/spi/spi_mpc8xxx.c	2009-06-12 10:54:48.000000000 +0200
> @@ -666,9 +666,10 @@ static void mpc8xxx_spi_cs_control(struc
>  	struct mpc8xxx_spi_probe_info *pinfo = to_of_pinfo(dev->platform_data);
>  	u16 cs = spi->chip_select;
>  	int gpio = pinfo->gpios[cs];
> -	bool alow = pinfo->alow_flags[cs];
> -
> -	gpio_set_value(gpio, on ^ alow);
> +	if (gpio != -EEXIST) {
> +		bool alow = pinfo->alow_flags[cs];
> +		gpio_set_value(gpio, on ^ alow);

Please put an empty line after variable declaration.


Thanks!

-- 
Anton Vorontsov
email: cbouatmailru at gmail.com
irc://irc.freenode.net/bd2