[PATCH v5] 83xx: add support for the kmeter1 board.

[Kumar Gala]

On Jun 15, 2009, at 2:38 AM, Heiko Schocher wrote:

> The following series implements basic board support for
> the kmeter1 board from keymile, based on a MPC8360.
>
> This series provides the following functionality:
>
> - The board can boot with a serial console on UART1
> - Ethernet:
>    UCC1 in RGMII mode
>    UCC2 in RGMII mode
>    UCC4 in RMII mode
>    UCC5 in RMII mode
>    UCC6 in RMII mode
>    UCC7 in RMII mode
>    UCC8 in RMII mode
>
>    following patch is necessary for working UCC in RMII mode:
>
>    http://lists.ozlabs.org/pipermail/linuxppc-dev/2009-April/070804.html
>
> - Flash accessed via MTD layer
>
>  On this hardware there is an Intel P30 flash, following patch
>  series is necessary for working with this hardware:
>
>  http://lists.ozlabs.org/pipermail/linuxppc-dev/2009-April/070624.html
>
> - I2C using I2C Bus 1 from the MPC8360 cpu
>
> Signed-off-by: Heiko Schocher <hs at denx.de>
> ---
> changes since v1:
> - added comments from Kumar Gala and Scott Wood
> - get rid of using get_immrbase() in board specific code
>
> changes since v2:
> - added comments from Kumar Gala
> - rebased against 1406de8e11eb043681297adf86d6892ff8efc27a
>  from git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc.git
>
> changes since v3:
> - updated mailinglistarchivelinks for necessary patches in commit  
> text.
>
> changes since v4:
> - added comments from David Gibson
>
> $ ./scripts/checkpatch.pl 0001--83xx-add-support-for-the-kmeter1- 
> board.patch
> total: 0 errors, 0 warnings, 1636 lines checked
>
> 0001--83xx-add-support-for-the-kmeter1-board.patch has no obvious  
> style problems and is ready for submission.
> $
>
> Signed-off-by: Heiko Schocher <hs at denx.de>
> ---
> arch/powerpc/boot/dts/kmeter1.dts           |  520 +++++++++++++++
> arch/powerpc/configs/83xx/kmeter1_defconfig |  908 ++++++++++++++++++ 
> +++++++++
> arch/powerpc/platforms/83xx/Kconfig         |    7 +
> arch/powerpc/platforms/83xx/Makefile        |    1 +
> arch/powerpc/platforms/83xx/kmeter1.c       |  191 ++++++
> 5 files changed, 1627 insertions(+), 0 deletions(-)
> create mode 100644 arch/powerpc/boot/dts/kmeter1.dts
> create mode 100644 arch/powerpc/configs/83xx/kmeter1_defconfig
> create mode 100644 arch/powerpc/platforms/83xx/kmeter1.c

applied to next

- k