[PATCH v3] 83xx: add support for the kmeter1 board.

[Heiko Schocher]

Hello Kumar,

Kumar Gala wrote:
> On Jun 11, 2009, at 1:16 AM, Heiko Schocher wrote:
> 
>> The following series implements basic board support for
>> the kmeter1 board from keymile, based on a MPC8360.
>>
>> This series provides the following functionality:
>>
>> - The board can boot with a serial console on UART1
>> - Ethernet:
>>    UCC1 in RGMII mode
>>    UCC2 in RGMII mode
>>    UCC4 in RMII mode
>>    UCC5 in RMII mode
>>    UCC6 in RMII mode
>>    UCC7 in RMII mode
>>    UCC8 in RMII mode
>>
>>    following patch is necessary for working UCC in RMII mode:
>>
>>    http://ozlabs.org/pipermail/linuxppc-dev/2009-April/070909.html
>>
>> - Flash accessed via MTD layer
>>
>>  On this hardware there is an Intel P30 flash, following patch
>>  series is necessary for working with this hardware:
>>
>>  http://ozlabs.org/pipermail/linuxppc-dev/2009-April/070716.html
> 
> the links are stale since the ozlabs.org rebuilt and moved the
> maillist.. mind updating.

Ups, sorry, copy and paste error ...

bye
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany