[RFC] powerpc/mpc85xx: add support for suspend mode
Sebastian Andrzej Siewior
bigeasy at linutronix.de
Thu Jun 4 05:54:29 EST 2009
This patch adds support for the MPC85xx boards to enter the SLEEP mode.
The wake up is done via an external interrupt.
mpc85xx_enter_sleep() does not clear HID0_SLEEP in resume but it may be
okay since it gets cleared on next NAP/DOZE.
mpc85xx_enter_sleep() is mostly copied from NAP/DOZE. It does not look
like it is worth to merge into e500_idle(). I removed the feature check
for NAP/DOZE because it does not look required. It is just there to work
around the BDI. If it is required it could be moved to
mpc85xx_init_suspend().
The suspend.c file contains a sample implementation. I need additionally
to add hooks prio and after mpc85xx_enter_sleep() to toggle a few bits
in my FPGA. Since the suspend.c is really short I'm not sure if it is
worth to keep it here and add couple function prototypes or add the
required bits directly into the board code.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy at linutronix.de>
---
arch/powerpc/Kconfig | 2 +-
arch/powerpc/kernel/idle_e500.S | 43 +++++++++++++++++++++++++++++++++
arch/powerpc/platforms/85xx/Makefile | 1 +
arch/powerpc/platforms/85xx/suspend.c | 27 ++++++++++++++++++++
4 files changed, 72 insertions(+), 1 deletions(-)
create mode 100644 arch/powerpc/platforms/85xx/suspend.c
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index ff75539..80e3f6e 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -215,7 +215,7 @@ config ARCH_HIBERNATION_POSSIBLE
config ARCH_SUSPEND_POSSIBLE
def_bool y
- depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx
+ depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx || PPC_85xx
config PPC_DCR_NATIVE
bool
diff --git a/arch/powerpc/kernel/idle_e500.S b/arch/powerpc/kernel/idle_e500.S
index 47a1a98..185f807 100644
--- a/arch/powerpc/kernel/idle_e500.S
+++ b/arch/powerpc/kernel/idle_e500.S
@@ -92,3 +92,46 @@ _GLOBAL(power_save_ppc32_restore)
#endif
b transfer_to_handler_cont
+
+_GLOBAL(mpc85xx_enter_sleep)
+
+ rlwinm r3,r1,0,0,31-THREAD_SHIFT /* current thread_info */
+ lwz r4,TI_LOCAL_FLAGS(r3) /* set napping bit */
+ ori r4,r4,_TLF_SLEEPING /* so when we take an exception */
+ stw r4,TI_LOCAL_FLAGS(r3) /* it will return to our caller */
+
+ stwu r1, -16(r1)
+ mflr r0
+ stw r0, 20(r1)
+ bl flush_dcache_L1
+ lwz r0, 20(r1)
+ addi r1, r1, 16
+ mtlr r0
+ lis r3, HID0_SLEEP at h
+
+BEGIN_FTR_SECTION
+ msync
+ li r7, L2CSR0_L2FL at l
+ mtspr SPRN_L2CSR0, r7
+2:
+ mfspr r7, SPRN_L2CSR0
+ andi. r4, r7, L2CSR0_L2FL at l
+ bne 2b
+END_FTR_SECTION_IFSET(CPU_FTR_L2CSR)
+1:
+ /* Go to SLEEP now */
+ mfspr r4, SPRN_HID0
+ rlwinm r4, r4, 0, ~(HID0_DOZE|HID0_NAP|HID0_SLEEP)
+ or r4, r4, r3
+ isync
+ mtspr SPRN_HID0,r4
+ isync
+
+ mfmsr r7
+ oris r7,r7,MSR_WE at h
+ ori r7,r7,MSR_EE
+ msync
+ mtmsr r7
+ isync
+2:
+ b 2b
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index a857b35..e2ae7d1 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -15,3 +15,4 @@ obj-$(CONFIG_SBC8560) += sbc8560.o
obj-$(CONFIG_SBC8548) += sbc8548.o
obj-$(CONFIG_SOCRATES) += socrates.o socrates_fpga_pic.o
obj-$(CONFIG_KSI8560) += ksi8560.o
+obj-$(CONFIG_SUSPEND) += suspend.o
diff --git a/arch/powerpc/platforms/85xx/suspend.c b/arch/powerpc/platforms/85xx/suspend.c
new file mode 100644
index 0000000..b6507d0
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/suspend.c
@@ -0,0 +1,27 @@
+#include <linux/suspend.h>
+
+void mpc85xx_enter_sleep(void);
+static int mpc85xx_suspend_valid(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ return 1;
+ }
+ return 0;
+}
+
+static int mpc85xx_suspend_enter(suspend_state_t state)
+{
+ mpc85xx_enter_sleep();
+}
+
+static struct platform_suspend_ops mpc85xx_pm_ops = {
+ .valid = mpc85xx_suspend_valid,
+ .enter = mpc85xx_suspend_enter,
+};
+
+int mpc85xx_init_suspend(void)
+{
+ suspend_set_ops(&mpc85xx_pm_ops);
+ return 0;
+}
--
1.6.0.6
More information about the Linuxppc-dev
mailing list