eth0: Could not attach to PHY

[Ratheesh]

Hi
The device tree format has changed from linux-2.6.24. You need to port the
U-Boot to the latest version. Even I faced the same issue.

Regards
Ratheesh

On Thu, Jan 22, 2009 at 11:30 PM, Scott Wood <scottwood at freescale.com>wrote:

> On Thu, Jan 22, 2009 at 12:45:22PM -0500, Haiying Wang wrote:
> > On Thu, 2009-01-22 at 06:37 -0800, wael showair wrote:
> >
> > >             mdio at 24520 {
> > >                     #address-cells = <1>;
> > >                     #size-cells = <0>;
> > >                     device_type = "mdio";
> > >                     compatible = "gianfar";
> > >                     reg = <24520 20>;
> > >                     linux,phandle = <24520>;
> >
> > Change compatible to "gianfar-mdio".
>
> "fsl,gianfar-mdio"
>
> -Scott
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev at ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/linuxppc-dev/attachments/20090123/acc66a2f/attachment.htm>