[PATCH 3/3] powerpc/86xx: Extend GE Fanuc GPIO driver for the SBC310
Martyn Welch
martyn.welch at gefanuc.com
Mon Jan 19 22:33:34 EST 2009
This patch adds basic support for the 6 GPIO lines found on GE Fanucs SBC310 to the GE Fanuc GPIO driver.
Signed-off-by: Martyn Welch <martyn.welch at gefanuc.com>
---
arch/powerpc/configs/86xx/gef_sbc310_defconfig | 2 +
arch/powerpc/platforms/86xx/gef_gpio.c | 36 +++++++++++++++++++++---
2 files changed, 32 insertions(+), 6 deletions(-)
diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
index 157fdcd..79542ce 100644
--- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
@@ -880,7 +880,7 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
+CONFIG_GPIO_SYSFS=y
#
# Memory mapped GPIO expanders:
diff --git a/arch/powerpc/platforms/86xx/gef_gpio.c b/arch/powerpc/platforms/86xx/gef_gpio.c
index 85b2800..b2ea887 100644
--- a/arch/powerpc/platforms/86xx/gef_gpio.c
+++ b/arch/powerpc/platforms/86xx/gef_gpio.c
@@ -37,8 +37,6 @@
#define GEF_GPIO_OVERRUN 0x1C
#define GEF_GPIO_MODE 0x20
-#define NUM_GPIO 19
-
static void _gef_gpio_set(void __iomem *reg, unsigned int offset, int value)
{
unsigned int data;
@@ -103,10 +101,10 @@ static void gef_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
static int __init gef_gpio_init(void)
{
struct device_node *np;
+ int retval;
+ struct of_mm_gpio_chip *gef_gpio_chip;
for_each_compatible_node(np, NULL, "gef,sbc610-gpio") {
- int retval;
- struct of_mm_gpio_chip *gef_gpio_chip;
pr_debug("%s: Initialising GEF GPIO\n", np->full_name);
@@ -120,7 +118,35 @@ static int __init gef_gpio_init(void)
/* Setup pointers to chip functions */
gef_gpio_chip->of_gc.gpio_cells = 2;
- gef_gpio_chip->of_gc.gc.ngpio = NUM_GPIO;
+ gef_gpio_chip->of_gc.gc.ngpio = 19;
+ gef_gpio_chip->of_gc.gc.direction_input = gef_gpio_dir_in;
+ gef_gpio_chip->of_gc.gc.direction_output = gef_gpio_dir_out;
+ gef_gpio_chip->of_gc.gc.get = gef_gpio_get;
+ gef_gpio_chip->of_gc.gc.set = gef_gpio_set;
+
+ /* This function adds a memory mapped GPIO chip */
+ retval = of_mm_gpiochip_add(np, gef_gpio_chip);
+ if (retval) {
+ kfree(gef_gpio_chip);
+ pr_err("%s: Unable to add GPIO\n", np->full_name);
+ }
+ }
+
+ for_each_compatible_node(np, NULL, "gef,sbc310-gpio") {
+
+ pr_debug("%s: Initialising GEF GPIO\n", np->full_name);
+
+ /* Allocate chip structure */
+ gef_gpio_chip = kzalloc(sizeof(*gef_gpio_chip), GFP_KERNEL);
+ if (!gef_gpio_chip) {
+ pr_err("%s: Unable to allocate structure\n",
+ np->full_name);
+ continue;
+ }
+
+ /* Setup pointers to chip functions */
+ gef_gpio_chip->of_gc.gpio_cells = 2;
+ gef_gpio_chip->of_gc.gc.ngpio = 6;
gef_gpio_chip->of_gc.gc.direction_input = gef_gpio_dir_in;
gef_gpio_chip->of_gc.gc.direction_output = gef_gpio_dir_out;
gef_gpio_chip->of_gc.gc.get = gef_gpio_get;
More information about the Linuxppc-dev
mailing list