[PATCH RFC v5] net: add PCINet driver

[Ira Snyder]

On Thu, Jan 15, 2009 at 01:58:33PM +0100, Arnd Bergmann wrote:
> On Thursday 15 January 2009, Ira Snyder wrote:
> 
> > The only problem with that is that you cannot route interrupts from the
> > DMA controller over PCI with the PowerPC core running. Which makes it
> > mostly useless for this case.
> 
> If the host supports MSI, you can simply program the DMA controller to
> write the correct message to the inbound address of the MSI interrupt
> controller!
> 
> All modern host systems should have MSI, as this is required by the
> PCIe specification, but it still somewhat limits the choice of your
> hosts.
> 

These are PCI boards, not PCIe. The host computers are all Pentium3-M
systems. I tried enabling MSI on the Freescale boards in the driver, by
calling pci_enable_msi() during probe(), and it failed. I'm pretty sure
I can't do MSI.

I'll keep thinking about how to manage the DMA. Feel free to toss around
any ideas you have, though.

Ira