[PATCH v2 4/4] powerpc/83xx: Add PCI-E support for all MPC83xx boards with PCI-E

[Anton Vorontsov]

On Thu, Jan 01, 2009 at 08:29:39AM -0600, Kumar Gala wrote:
[...]
>>>>>> +		compatible = "fsl,mpc8315-pcie", "fsl,mpc8314-pcie";
>>>>>> +		reg = <0xe0009000 0x00001000 0xb0000000 0x01000000>;
>>>>>
>>>>> the size on the 0xb0000000 seems wrong
>>>>
>>>> This is how FSL U-Boots configure the cfg window, and I'm trying to
>>>> retain the compatibility. Anyway, now Linux maps only the first 4kB
>>>> of that area, so we don't actually care about this, but dts is still
>>>> correct for older u-boots. Newer U-Boots might want to correct this
>>>> value if they want to use other cfg window setup...
>>>
>>> I'd rather not pollute the .dts with this
>>
>> So you prefer to change the cfg window size to 0x1000?
>
> I'd prefer to drop it (assuming that is reasonable).

I see. Yes, we can drop it and just read the outwin0 BAR register
to find out the cfg space base address.

> Does the PCI-express OF draft spec cover describing cfg space
>
> http://playground.sun.com/1275/proposals/New/516-it.txt

If I understood correctly, the spec describes directly mapped
cfg space, this won't work for 83xx PCI-E.

I'll post new patches soon.

Thanks,

-- 
Anton Vorontsov
email: cbouatmailru at gmail.com
irc://irc.freenode.net/bd2