2.6.28 does not boot on MPC8315E-RDB, or...?

[Steve DeLaney]

we are booting 2.6.26 on MPC8349-MITXE
do you need a device tree?  this can be tftp loaded, or flashed in the board
and
cp.b from flash to ram before booting. 

-----Original Message-----
From: linuxppc-dev-bounces+onramp123=yahoo.com at ozlabs.org
[mailto:linuxppc-dev-bounces+onramp123=yahoo.com at ozlabs.org] On Behalf Of
Leon Woestenberg
Sent: Saturday, January 03, 2009 2:58 PM
To: Linux PPC
Subject: 2.6.28 does not boot on MPC8315E-RDB, or...?

Hello,

I cannot get my 2.6.28 kernel to boot. The board resets after u-boot starts
the kernel.

I would like to verify if someone got it booting already?

Regards,

Leon.


TFTP from server 192.168.1.24; our IP address is 192.168.1.15 Filename
'uImage-mpc8315e-rdb.bin'.
Load address: 0x400000
Loading: T #################################################################
         #################################################################
         #########
done
Bytes transferred = 2033899 (1f08eb hex)
Speed: 1000, full duplex
Using eTSEC0 device
TFTP from server 192.168.1.24; our IP address is 192.168.1.15 Filename
'uImage-mpc8315e-rdb.dtb'.
Load address: 0x700000
Loading: #
done
Bytes transferred = 12288 (3000 hex)
## Booting image at 00400000 ...
   Image Name:   Angstrom/2.6.28/mpc8315e-rdb
   Created:      2009-01-03  22:44:25 UTC
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    2033835 Bytes =  1.9 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
   Booting using the fdt at 0x700000


U-Boot 1.3.0-rc2 (Oct  7 2008 - 11:57:25) MPC83XX



--
Leon
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev at ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev