[PATCH v2] Configure PSC4 and PSC5 as UART.

[Grzegorz Bernacki]

On digsy MTC PSC4 and PSC5 should be configured as UART, not PSC3 and PSC4.

Signed-off-by: Grzegorz Bernacki <gjb at semihalf.com>
---
Version 2:
 - rebased to Ben Herrenschmidt's -next

 arch/powerpc/boot/dts/digsy_mtc.dts |   12 ++++++------
 1 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/boot/dts/digsy_mtc.dts b/arch/powerpc/boot/dts/digsy_mtc.dts
index 0e85ebf..4c36186 100644
--- a/arch/powerpc/boot/dts/digsy_mtc.dts
+++ b/arch/powerpc/boot/dts/digsy_mtc.dts
@@ -155,18 +155,18 @@
 			reg = <0x1f00 0x100>;
 		};
 
-		serial at 2400 {		// PSC3
-			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2400 0x100>;
-			interrupts = <2 3 0>;
-		};
-
 		serial at 2600 {		// PSC4
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			reg = <0x2600 0x100>;
 			interrupts = <2 11 0>;
 		};
 
+		serial at 2800 {		// PSC5
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2800 0x100>;
+			interrupts = <2 12 0>;
+		};
+
 		ethernet at 3000 {
 			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
 			reg = <0x3000 0x400>;
-- 
1.5.2.2