[PATCH 0/7][RFC] function graph tracer port to PowerPC

[Frederic Weisbecker]

On Wed, Feb 11, 2009 at 08:10:51PM -0500, Steven Rostedt wrote:
> 
> The following set of patches are RFC and not for inclusion
> (unless everyone is fine with them as is).
> 
> This is the port to PowerPC of the function graph tracer that was written
> by Frederic Weisbecker for the x86 architecture.  It is broken up
> into a series of logical steps.
> 
> 1) get generic code ready for other archs
> 2) get PowerPC 64-bit working with just static function tracing
> 3) get PowerPC 64-bit working with dynamic function tracing
> 4) get PowerPC 32-bit working with just static function tracing
> 5) get PowerPC 32-bit working with dynamic function tracing
> 
> (with some clean ups in between)
> 


Thanks a lot Steven!
I'm sad to not having a Power Pc to test it...

 
> The function graph tracer not only traces the start of a function
> (uses the function tracer part for that) but also uses the kprobes
> trick to replace the return address with a hook to trace the exit
> of the function. These hooks are generic in that other tracers
> can also use them. But the function graph tracer itself is very
> powerful. Simply doing the following:
> 
> # echo function_graph > /debug/tracing/current_tracer
> # cat /debug/tracing/trace
> 
> # tracer: function_graph
> #
> # CPU OVERHEAD/DURATION            FUNCTION CALLS
> # |   |        |                   |   |   |   |
>  ------------------------------------------
>  0)   less-2228    =>    cat-2229   
>  ------------------------------------------
> 
>  0)               |    .__do_fault() {
>  0)               |      .filemap_fault() {
>  0)               |        .find_lock_page() {
>  0)               |          .find_get_page() {
>  0)   3.168 us    |            .__rcu_read_lock();
>  0)   2.704 us    |            .__rcu_read_unlock();
>  0) + 14.640 us   |          }
>  0) + 20.112 us   |        }
>  0) + 26.464 us   |      }
>  0)   2.912 us    |      ._spin_lock();
>  0)   2.656 us    |      .page_add_file_rmap();
>  0)               |      .update_mmu_cache() {
>  0)               |        .hash_preload() {
>  0)   2.368 us    |          .get_slice_psize();
>  0)   2.752 us    |          .hash_page_do_lazy_icache();
>  0)   3.568 us    |          .native_hpte_insert();
>  0) + 19.680 us   |        }
>  0) + 24.960 us   |      }
>  0)   2.336 us    |      ._spin_unlock();
>  0)               |      .unlock_page() {
>  0)   2.688 us    |        .page_waitqueue();
>  0)   2.608 us    |        .__wake_up_bit();
>  0) + 12.912 us   |      }
>  0) ! 351.776 us  |    }
>  0) ! 357.392 us  |  }
>  0)   3.040 us    |  .up_read();
>  0)               |  .compat_sys_ioctl() {
>  0)   3.024 us    |    .fget_light();
>  0)               |    .tty_compat_ioctl() {
>  0)   2.704 us    |      .tty_paranoia_check();
>  0)               |      .tty_ldisc_ref_wait() {
>  0)               |        .tty_ldisc_try() {
>  0)   2.880 us    |          ._spin_lock_irqsave();
>  0)   2.928 us    |          ._spin_unlock_irqrestore();
>  0) + 13.776 us   |        }
>  0) + 19.424 us   |      }
> 
> [...]
> 
> As you can see, it gives a nice call trace of the functions being called
> at run time, as well as a time stamp of how much time the function
> took to execute.
> 
> Adding dynamic tracing to the mix, we can trace a single function:
> 
> # echo .do_fork > /debug/tracing/set_graph_function
> # echo function_graph > /debug/tracing/current_tracer
> # cat /debug/tracing/trace
> 
> # tracer: function_graph
> #
> # CPU OVERHEAD/DURATION            FUNCTION CALLS
> # |   |        |                   |   |   |   |
>  1)               |  .do_fork() {
>  1)               |    .copy_process() {
>  1)               |      .prepare_to_copy() {
>  1)   2.944 us    |        .flush_fp_to_thread();
>  1)   2.800 us    |        .flush_altivec_to_thread();
>  1)   2.608 us    |        .flush_vsx_to_thread();
>  1) + 19.184 us   |      }
>  1)               |      .kmem_cache_alloc() {
>  1)   2.464 us    |        .slab_should_failslab();
>  1)   8.304 us    |      }
>  1)               |      .alloc_thread_info() {
>  1)               |        .kmem_cache_alloc() {
>  1)   2.512 us    |          .slab_should_failslab();
>  1)   8.224 us    |        }
>  1) + 13.344 us   |      }
>  1)   7.584 us    |      .arch_dup_task_struct();
>  1)               |      .copy_creds() {
>  1)   2.736 us    |        .__mutex_init();
>  1)               |        .prepare_creds() {
>  1)               |          .kmem_cache_alloc() {
>  1)   2.640 us    |            .slab_should_failslab();
>  1)   8.368 us    |          }
> 
> [...]
> 
> 
> Note, the '.' in the '.do_fork' is a PowerPC64 thing. PowerPC32 and
> other archs just need to do 'do_fork', without the dot.
> 
> 
> The following patches are in:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace.git
> 
>     branch: rfc/ppc/ftrace
> 
> 
> Steven Rostedt (7):
>       tracing/function-graph-tracer: make arch generic push pop functions
>       powerpc64: port of the function graph tracer
>       powerpc64, tracing: add function graph tracer with dynamic tracing
>       powerpc64, ftrace: save toc only on modules for function graph
>       powerpc32, ftrace: save and restore mcount regs with macro
>       powerpc32, ftrace: port function graph tracer to ppc32, static only
>       powerpc32, ftrace: dynamic function graph tracer
> 
> ----
>  arch/powerpc/Kconfig                 |    1 +
>  arch/powerpc/include/asm/ftrace.h    |   39 ++++++++++-
>  arch/powerpc/kernel/Makefile         |    9 +-
>  arch/powerpc/kernel/entry_32.S       |  115 ++++++++++++++---------------
>  arch/powerpc/kernel/entry_64.S       |   89 +++++++++++++++++++++-
>  arch/powerpc/kernel/ftrace.c         |  135 ++++++++++++++++++++++++++++++++--
>  arch/powerpc/kernel/process.c        |   16 ++++
>  arch/powerpc/kernel/vmlinux.lds.S    |    1 +
>  arch/x86/include/asm/ftrace.h        |   25 ------
>  arch/x86/kernel/ftrace.c             |   75 +------------------
>  include/linux/ftrace.h               |   24 ++++++
>  kernel/trace/trace_functions_graph.c |   75 +++++++++++++++++++
>  12 files changed, 428 insertions(+), 176 deletions(-)
> --