[PATCH 3/3] powerpc/83xx: Add FSL eSDHC support for MPC837x-RDB boards

[Kumar Gala]

On Feb 5, 2009, at 1:04 PM, Anton Vorontsov wrote:

> Simply add appropriate sdhci nodes.
>
> Note that U-Boot should configure pin multiplexing for eSDHC prior
> to Linux could use it. U-Boot should also fill-in the clock-frequency
> property (eSDHC clock depends on board-specific SCCR[ESDHCCM] bits).
>
> Signed-off-by: Anton Vorontsov <avorontsov at ru.mvista.com>
> ---
> arch/powerpc/boot/dts/mpc8377_rdb.dts |    9 +++++++++
> arch/powerpc/boot/dts/mpc8378_rdb.dts |    9 +++++++++
> arch/powerpc/boot/dts/mpc8379_rdb.dts |    9 +++++++++
> 3 files changed, 27 insertions(+), 0 deletions(-)


applied to next

- k