[PATCH 2/4] phylib: Properly reinitialize PHYs after hibernation
Anton Vorontsov
avorontsov at ru.mvista.com
Thu Dec 31 05:23:30 EST 2009
Since hibernation assumes power loss, we should fully reinitialize
PHYs (including platform fixups), as if PHYs were just attached.
This patch factors phy_init_hw() out of phy_attach_direct(), then
converts mdio_bus to dev_pm_ops and adds an appropriate restore()
callback.
Signed-off-by: Anton Vorontsov <avorontsov at ru.mvista.com>
---
drivers/net/phy/mdio_bus.c | 50 ++++++++++++++++++++++++++++++++++++------
drivers/net/phy/phy_device.c | 30 ++++++++++++------------
include/linux/phy.h | 1 +
3 files changed, 59 insertions(+), 22 deletions(-)
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 49252d3..e17b702 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -264,6 +264,8 @@ static int mdio_bus_match(struct device *dev, struct device_driver *drv)
(phydev->phy_id & phydrv->phy_id_mask));
}
+#ifdef CONFIG_PM
+
static bool mdio_bus_phy_may_suspend(struct phy_device *phydev)
{
struct device_driver *drv = phydev->dev.driver;
@@ -295,10 +297,7 @@ static bool mdio_bus_phy_may_suspend(struct phy_device *phydev)
return true;
}
-/* Suspend and resume. Copied from platform_suspend and
- * platform_resume
- */
-static int mdio_bus_suspend(struct device * dev, pm_message_t state)
+static int mdio_bus_suspend(struct device *dev)
{
struct phy_driver *phydrv = to_phy_driver(dev->driver);
struct phy_device *phydev = to_phy_device(dev);
@@ -318,7 +317,7 @@ static int mdio_bus_suspend(struct device * dev, pm_message_t state)
return phydrv->suspend(phydev);
}
-static int mdio_bus_resume(struct device * dev)
+static int mdio_bus_resume(struct device *dev)
{
struct phy_driver *phydrv = to_phy_driver(dev->driver);
struct phy_device *phydev = to_phy_device(dev);
@@ -338,11 +337,48 @@ no_resume:
return 0;
}
+static int mdio_bus_restore(struct device *dev)
+{
+ struct phy_device *phydev = to_phy_device(dev);
+ struct net_device *netdev = phydev->attached_dev;
+ int ret;
+
+ if (!netdev)
+ return 0;
+
+ ret = phy_init_hw(phydev);
+ if (ret < 0)
+ return ret;
+
+ /* The PHY needs to renegotiate. */
+ phydev->link = 0;
+ phydev->state = PHY_UP;
+
+ phy_start_machine(phydev, NULL);
+
+ return 0;
+}
+
+static struct dev_pm_ops mdio_bus_pm_ops = {
+ .suspend = mdio_bus_suspend,
+ .resume = mdio_bus_resume,
+ .freeze = mdio_bus_suspend,
+ .thaw = mdio_bus_resume,
+ .restore = mdio_bus_restore,
+};
+
+#define MDIO_BUS_PM_OPS (&mdio_bus_pm_ops)
+
+#else
+
+#define MDIO_BUS_PM_OPS NULL
+
+#endif /* CONFIG_PM */
+
struct bus_type mdio_bus_type = {
.name = "mdio_bus",
.match = mdio_bus_match,
- .suspend = mdio_bus_suspend,
- .resume = mdio_bus_resume,
+ .pm = MDIO_BUS_PM_OPS,
};
EXPORT_SYMBOL(mdio_bus_type);
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index b10fedd..8212b2b 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -378,6 +378,20 @@ void phy_disconnect(struct phy_device *phydev)
}
EXPORT_SYMBOL(phy_disconnect);
+int phy_init_hw(struct phy_device *phydev)
+{
+ int ret;
+
+ if (!phydev->drv || !phydev->drv->config_init)
+ return 0;
+
+ ret = phy_scan_fixups(phydev);
+ if (ret < 0)
+ return ret;
+
+ return phydev->drv->config_init(phydev);
+}
+
/**
* phy_attach_direct - attach a network device to a given PHY device pointer
* @dev: network device to attach
@@ -425,21 +439,7 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
/* Do initial configuration here, now that
* we have certain key parameters
* (dev_flags and interface) */
- if (phydev->drv->config_init) {
- int err;
-
- err = phy_scan_fixups(phydev);
-
- if (err < 0)
- return err;
-
- err = phydev->drv->config_init(phydev);
-
- if (err < 0)
- return err;
- }
-
- return 0;
+ return phy_init_hw(phydev);
}
EXPORT_SYMBOL(phy_attach_direct);
diff --git a/include/linux/phy.h b/include/linux/phy.h
index b1368b8..7968def 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -447,6 +447,7 @@ struct phy_device* get_phy_device(struct mii_bus *bus, int addr);
int phy_device_register(struct phy_device *phy);
int phy_clear_interrupt(struct phy_device *phydev);
int phy_config_interrupt(struct phy_device *phydev, u32 interrupts);
+int phy_init_hw(struct phy_device *phydev);
int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
u32 flags, phy_interface_t interface);
struct phy_device * phy_attach(struct net_device *dev,
--
1.6.5.7
More information about the Linuxppc-dev
mailing list