[PATCH 2/2] Adding PCI-E MSI support for PowerPC 460SX SOC.
Stefan Roese
sr at denx.de
Wed Dec 23 19:18:34 EST 2009
On Wednesday 23 December 2009 08:52:23 tmarri at amcc.com wrote:
> From: Tirumala Marri <tmarri at amcc.com>
Please find some mostly nitpicking comments below.
BTW: Did you already test this on other 4xx platforms, like 440SPe or 405EX?
What are your plans here?
> Signed-off-by: Tirumala Marri <tmarri at amcc.com>
> ---
> Kernel version: 2.6.33-rc1
> Testing:
> When 460SX configured as root as a end point E1000(Intell Ethernet card)
> was plugged into the one of the PCI-E ports. I was able to run the traffic
> with MSI interrupts.
> ---
> arch/powerpc/boot/dts/redwood.dts | 15 ++
> arch/powerpc/configs/44x/redwood_defconfig | 5 +-
> arch/powerpc/platforms/44x/Kconfig | 1 +
> arch/powerpc/sysdev/Kconfig | 7 +
> arch/powerpc/sysdev/Makefile | 1 +
> arch/powerpc/sysdev/ppc4xx_msi.c | 342
> ++++++++++++++++++++++++++++ arch/powerpc/sysdev/ppc4xx_msi.h |
> 39 ++++
> 7 files changed, 408 insertions(+), 2 deletions(-)
> create mode 100644 arch/powerpc/sysdev/ppc4xx_msi.c
> create mode 100644 arch/powerpc/sysdev/ppc4xx_msi.h
>
> diff --git a/arch/powerpc/boot/dts/redwood.dts
> b/arch/powerpc/boot/dts/redwood.dts index 81636c0..412d5f9 100644
> --- a/arch/powerpc/boot/dts/redwood.dts
> +++ b/arch/powerpc/boot/dts/redwood.dts
> @@ -357,6 +357,21 @@
> 0x0 0x0 0x0 0x3 &UIC3 0xa 0x4 /* swizzled int C */
> 0x0 0x0 0x0 0x4 &UIC3 0xb 0x4 /* swizzled int D */>;
> };
> + MSI: ppc4xx-msi at 400300000 {
> + compatible = "amcc,ppc4xx-msi", "ppc4xx-msi";
Better use something like this:
compatible = "amcc,ppc4xx-msi-ppc460sx", "amcc,ppc4xx-msi";
This way you could check for 460SX specials in the driver if needed.
> + reg = < 0x4 0x00300000 0x100
> + 0x4 0x00300000 0x100>;
> + sdr-base = <0x3B0>;
> + interrupts =<0 1 2 3>;
> + interrupt-parent = <&MSI>;
> + #interrupt-cells = <1>;
> + #address-cells = <0>;
> + #size-cells = <0>;
> + interrupt-map = <0 &UIC0 0xC 1
> + 1 &UIC0 0x0D 1
> + 2 &UIC0 0x0E 1
> + 3 &UIC0 0x0F 1>;
> + };
>
> };
>
> diff --git a/arch/powerpc/configs/44x/redwood_defconfig
> b/arch/powerpc/configs/44x/redwood_defconfig index ed31d4f..5d16c88 100644
> --- a/arch/powerpc/configs/44x/redwood_defconfig
> +++ b/arch/powerpc/configs/44x/redwood_defconfig
> @@ -158,6 +158,7 @@ CONFIG_DEFAULT_AS=y
> CONFIG_DEFAULT_IOSCHED="anticipatory"
> # CONFIG_FREEZER is not set
> CONFIG_PPC4xx_PCI_EXPRESS=y
> +CONFIG_PPC_MSI_BITMAP=y
>
> #
> # Platform support
> @@ -264,7 +265,7 @@ CONFIG_PCIEPORTBUS=y
> CONFIG_PCIEAER=y
> # CONFIG_PCIEASPM is not set
> CONFIG_ARCH_SUPPORTS_MSI=y
> -# CONFIG_PCI_MSI is not set
> +CONFIG_PCI_MSI=y
> # CONFIG_PCI_LEGACY is not set
> # CONFIG_PCI_DEBUG is not set
> # CONFIG_PCI_STUB is not set
> @@ -1062,7 +1063,7 @@ CONFIG_PRINT_STACK_DEPTH=64
> # CONFIG_DEBUG_PAGEALLOC is not set
> # CONFIG_CODE_PATCHING_SELFTEST is not set
> # CONFIG_FTR_FIXUP_SELFTEST is not set
> -# CONFIG_MSI_BITMAP_SELFTEST is not set
> +CONFIG_MSI_BITMAP_SELFTEST=y
> # CONFIG_XMON is not set
> # CONFIG_IRQSTACKS is not set
> # CONFIG_VIRQ_DEBUG is not set
> diff --git a/arch/powerpc/platforms/44x/Kconfig
> b/arch/powerpc/platforms/44x/Kconfig index 7486bff..9c3b8ca 100644
> --- a/arch/powerpc/platforms/44x/Kconfig
> +++ b/arch/powerpc/platforms/44x/Kconfig
> @@ -126,6 +126,7 @@ config REDWOOD
> select 460SX
> select PCI
> select PPC4xx_PCI_EXPRESS
> + select PPC4xx_MSI
> help
> This option enables support for the AMCC PPC460SX Redwood board.
>
> diff --git a/arch/powerpc/sysdev/Kconfig b/arch/powerpc/sysdev/Kconfig
> index 3965828..c8f1486 100644
> --- a/arch/powerpc/sysdev/Kconfig
> +++ b/arch/powerpc/sysdev/Kconfig
> @@ -7,8 +7,15 @@ config PPC4xx_PCI_EXPRESS
> depends on PCI && 4xx
> default n
>
> +config PPC4xx_MSI
> + bool
> + depends on PCI_MSI
> + depends on PCI && 4xx
> + default n
> +
> config PPC_MSI_BITMAP
> bool
> depends on PCI_MSI
> default y if MPIC
> default y if FSL_PCI
> + default y if PPC4xx_MSI
> diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
> index 5642924..4c67d2d 100644
> --- a/arch/powerpc/sysdev/Makefile
> +++ b/arch/powerpc/sysdev/Makefile
> @@ -36,6 +36,7 @@ obj-$(CONFIG_PPC_I8259) += i8259.o
> obj-$(CONFIG_IPIC) += ipic.o
> obj-$(CONFIG_4xx) += uic.o
> obj-$(CONFIG_4xx_SOC) += ppc4xx_soc.o
> +obj-$(CONFIG_PPC4xx_MSI) += ppc4xx_msi.o
> obj-$(CONFIG_XILINX_VIRTEX) += xilinx_intc.o
> obj-$(CONFIG_XILINX_PCI) += xilinx_pci.o
> obj-$(CONFIG_OF_RTC) += of_rtc.o
> diff --git a/arch/powerpc/sysdev/ppc4xx_msi.c
> b/arch/powerpc/sysdev/ppc4xx_msi.c new file mode 100644
> index 0000000..3c2ef32
> --- /dev/null
> +++ b/arch/powerpc/sysdev/ppc4xx_msi.c
> @@ -0,0 +1,342 @@
> +/*
> + * Copyright (C) 2009 Applied Micro Circuits corporation.
> + *
> + * Author: Feng Kan <fkan at amcc.com>
> + * Tirumala Marri <tmarri at amcc.com>
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; version 2 of the
> + * License.
> + */
> +#include <linux/irq.h>
> +#include <linux/bootmem.h>
> +#include <linux/pci.h>
> +#include <linux/msi.h>
> +#include <linux/of_platform.h>
> +#include <linux/interrupt.h>
> +#include <linux/device.h>
> +#include <asm/prom.h>
> +#include <asm/hw_irq.h>
> +#include <asm/ppc-pci.h>
> +#include <asm/dcr.h>
> +#include <asm/dcr-regs.h>
> +#include "ppc4xx_msi.h"
> +
> +
Nitpicking: Remove one empty line here.
> +static struct ppc4xx_msi *ppc4xx_msi;
> +
> +struct ppc4xx_msi_feature {
> + u32 ppc4xx_pic_ip;
> + u32 msiir_offset;
> +};
> +
> +static int ppc4xx_msi_init_allocator(struct ppc4xx_msi *msi_data)
> +{
> + int rc;
> +
> + rc = msi_bitmap_alloc(&msi_data->bitmap, NR_MSI_IRQS,
> + msi_data->irqhost->of_node);
> + if (rc)
> + return rc;
> + rc = msi_bitmap_reserve_dt_hwirqs(&msi_data->bitmap);
> + if (rc < 0) {
> + msi_bitmap_free(&msi_data->bitmap);
> + return rc;
> + }
> + return 0;
> +}
> +
> +
Nitpicking: Remove one empty line here.
> +static void ppc4xx_msi_cascade(unsigned int irq, struct irq_desc *desc)
> +{
> + unsigned int cascade_irq;
> + struct ppc4xx_msi *msi_data = ppc4xx_msi;
> + int msir_index = -1;
> +
> + raw_spin_lock(&desc->lock);
> + if (desc->chip->mask_ack) {
> + desc->chip->mask_ack(irq);
> + } else {
> + desc->chip->mask(irq);
> + desc->chip->ack(irq);
> + }
> +
> + if (unlikely(desc->status & IRQ_INPROGRESS))
> + goto unlock;
> +
> + msir_index = (int)desc->handler_data;
> +
> + if (msir_index >= NR_MSI_IRQS)
> + cascade_irq = NO_IRQ;
> +
> + desc->status |= IRQ_INPROGRESS;
> +
> + cascade_irq = irq_linear_revmap(msi_data->irqhost, msir_index);
> + if (cascade_irq != NO_IRQ)
> + generic_handle_irq(cascade_irq);
> + desc->status &= ~IRQ_INPROGRESS;
> +
> + if (!(desc->status & IRQ_DISABLED) && desc->chip->unmask)
> + desc->chip->unmask(irq);
> +unlock:
> + raw_spin_unlock(&desc->lock);
> +}
Nitpicking: Add one empty line here.
> +static void ppc4xx_compose_msi_msg(struct pci_dev *pdev, int hwirq,
> + struct msi_msg *msg)
> +{
> + struct ppc4xx_msi *msi_data = ppc4xx_msi;
> +
> + msg->address_lo = msi_data->msi_addr_lo;
> + msg->address_hi = msi_data->msi_addr_hi;
> + msg->data = hwirq;
> +}
> +
> +
Nitpicking: Remove one empty line here.
> +int ppc4xx_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
> +{
> + struct msi_desc *entry;
> + int rc, hwirq;
> + unsigned int virq;
> + struct msi_msg msg;
> + struct ppc4xx_msi *msi_data = ppc4xx_msi;
> +
> +
> + list_for_each_entry(entry, &dev->msi_list, list) {
> + hwirq = msi_bitmap_alloc_hwirqs(&msi_data->bitmap, 1);
> + if (hwirq < 0) {
> + rc = hwirq;
> + dev_err(&dev->dev, "%s: fail allocating msi\
> + interrupt\n", __func__);
> + goto out_free;
> + }
> +
> + pr_debug(KERN_INFO"mis is %p\n", msi_data->irqhost);
> + virq = irq_create_mapping(msi_data->irqhost, hwirq);
> + if (virq == NO_IRQ) {
> + dev_err(&dev->dev, "%s: fail mapping irq\n", __func__);
> + rc = -ENOSPC;
> + goto out_free;
> + }
> +
> + set_irq_msi(virq, entry);
> + ppc4xx_compose_msi_msg(dev, hwirq, &msg);
> + write_msi_msg(virq, &msg);
> + }
> +
> + return 0;
> +out_free:
> + return rc;
> +}
> +
> +void ppc4xx_teardown_msi_irqs(struct pci_dev *dev)
> +{
> + struct msi_desc *entry;
> + struct ppc4xx_msi *msi_data = ppc4xx_msi;
> + dev_dbg(&dev->dev, "PCIE-MSI: tearing down msi irqs\n");
> +
> + list_for_each_entry(entry, &dev->msi_list, list) {
> + if (entry->irq == NO_IRQ)
> + continue;
> + set_irq_msi(entry->irq, NULL);
> + msi_bitmap_free_hwirqs(&msi_data->bitmap,
> + virq_to_hw(entry->irq), 1);
> + irq_dispose_mapping(entry->irq);
> +
Nitpicking: Remove one empty line here.
> + }
> +
> + return;
> +}
> +
> +static int ppc4xx_msi_check_device(struct pci_dev *pdev, int nvec, int
> type) +{
> + pr_debug(KERN_INFO"PCIE-MSI:%s called. vec %x type %d\n",
> + __func__, nvec, type);
> + return 0;
> +}
> +
> +/*
> + * We do not need this actually. The MSIR register has been read once
> + * in the cascade interrupt. So, this MSI interrupt has been acked
> +*/
> +static void ppc4xx_msi_end_irq(unsigned int virq)
> +{
> +}
> +
> +
Nitpicking: Remove one empty line here. I'll stop mentioning this here. Please
check the whole file for this.
> +static struct irq_chip ppc4xx_msi_chip = {
> + .mask = mask_msi_irq,
> + .unmask = unmask_msi_irq,
> + .ack = ppc4xx_msi_end_irq,
> + .name = " UIC",
> +};
> +
> +static int ppc4xx_msi_host_map(struct irq_host *h, unsigned int virq,
> + irq_hw_number_t hw)
> +{
> + struct irq_chip *chip = &ppc4xx_msi_chip;
> +
> + irq_to_desc(virq)->status |= IRQ_TYPE_EDGE_RISING;
> +
> + set_irq_chip_and_handler(virq, chip, handle_edge_irq);
> +
> + return 0;
> +}
> +
> +static struct irq_host_ops ppc4xx_msi_host_ops = {
> + .map = ppc4xx_msi_host_map,
> +};
> +
> +
> +static int __devinit ppc4xx_msi_probe(struct of_device *dev,
> + const struct of_device_id *match)
> +{
> + struct ppc4xx_msi *msi;
> + struct resource res, rmsi;
> + int i, count;
> + int rc;
> + int virt_msir;
> + const u32 *p;
> + const u32 *sdr_base;
> + u32 *msi_virt = NULL;
> + dma_addr_t msi_phys;
> +
> +
> + msi = kzalloc(sizeof(struct ppc4xx_msi), GFP_KERNEL);
> + if (!msi) {
> + dev_err(&dev->dev, "No memory for MSI structure\n");
> + rc = -ENOMEM;
> + goto error_out;
> + }
> +
> + msi->irqhost = irq_alloc_host(dev->node, IRQ_HOST_MAP_LINEAR,
> + NR_MSI_IRQS, &ppc4xx_msi_host_ops, 0);
> + if (msi->irqhost == NULL) {
> + dev_err(&dev->dev, "No memory for MSI irqhost\n");
> + rc = -ENOMEM;
> + goto error_out;
> + }
> +
> +
> + /* Get MSI ranges */
> + rc = of_address_to_resource(dev->node, 0, &rmsi);
> + if (rc) {
> + dev_err(&dev->dev, "%s resource error!\n",
> + dev->node->full_name);
> + goto error_out;
> + }
> +
> +
> + /* Get the MSI reg base */
> + rc = of_address_to_resource(dev->node, 1, &res);
> + if (rc) {
> + dev_err(&dev->dev, "%s resource error!\n",
> + dev->node->full_name);
> + goto error_out;
> + }
> + /* Get the sdr-base */
> + sdr_base = (u32 *)of_get_property(dev->node, "sdr-base", NULL);
> + if (sdr_base == NULL) {
> + dev_err(&dev->dev, "%s resource error!\n",
> + dev->node->full_name);
> + goto error_out;
> + }
> + msi->sdr_base = *sdr_base;
> +#if defined(CONFIG_460SX)
> + mtdcri(SDR0, msi->sdr_base, res.start >> 32);
> + mtdcri(SDR0, msi->sdr_base + 1, res.start & 0xFFFFFFFF);
> + msi->msi_regs = ioremap(res.start, res.end - res.start + 1);
msi->msi_regs = ioremap(res.start, resource_size(&res));
> +#else
> + dev_err(&dev->dev, " Invalid Device \n");
> + goto error_out;
> +#endif
Please don't introduce such a compile-time selection here. You don't even need
it, since the register bases are provided via the device-tree. So just remove
the #if and it's #else part here.
> + if (!msi->msi_regs) {
> + dev_err(&dev->dev, "ioremap problem failed\n");
> + goto error_out;
> + }
> + /* MSI region always mapped in 4GB region*/
> + msi->msi_addr_hi = 0x0;
> + msi_virt = dma_alloc_coherent(&dev->dev, 64, &msi_phys,
> + GFP_KERNEL);
> + if (msi_virt == NULL) {
> + dev_err(&dev->dev, "No memory for MSI mem space\n");
> + rc = -ENOMEM;
> + goto error_out;
> + }
> + msi->msi_addr_lo = (u32)msi_phys;
> +
> + /* Progam the Interrupt handler Termination addr registers */
> + out_be32(msi->msi_regs + PEIH_TERMADH, msi->msi_addr_hi);
> + out_be32(msi->msi_regs + PEIH_TERMADL, msi->msi_addr_lo);
> +
> + /* Program MSI Expected data and Mask bits */
> + out_be32(msi->msi_regs + PEIH_MSIED, MSI_DATA_PATTERN);
> + out_be32(msi->msi_regs + PEIH_MSIMK, MSI_DATA_PATTERN);
> +
> + msi->irqhost->host_data = msi;
> +
> + if (ppc4xx_msi_init_allocator(msi)) {
> + dev_err(&dev->dev, "Error allocating MSI bitmap\n");
> + goto error_out;
> + }
> +
> + p = of_get_property(dev->node, "interrupts", &count);
> + if (!p) {
> + dev_err(&dev->dev, "no interrupts property found on %s\n",
> + dev->node->full_name);
> + rc = -ENODEV;
> + goto error_out;
> + }
> + if (count == 0) {
> + dev_err(&dev->dev, "Malformed interrupts property on %s\n",
> + dev->node->full_name);
> + rc = -EINVAL;
> + goto error_out;
> + }
> +
> + for (i = 0; i < NR_MSI_IRQS; i++) {
> + virt_msir = irq_of_parse_and_map(dev->node, i);
> + if (virt_msir != NO_IRQ) {
> + set_irq_data(virt_msir, (void *)i);
> + set_irq_chained_handler(virt_msir, ppc4xx_msi_cascade);
> + }
> + }
> +
> + ppc4xx_msi = msi;
> +
> + WARN_ON(ppc_md.setup_msi_irqs);
> + ppc_md.setup_msi_irqs = ppc4xx_setup_msi_irqs;
> + ppc_md.teardown_msi_irqs = ppc4xx_teardown_msi_irqs;
> + ppc_md.msi_check_device = ppc4xx_msi_check_device;
> + return 0;
> +error_out:
> + if (msi_virt)
> + dma_free_coherent(&dev->dev, 64, msi_virt, msi_phys);
> + kfree(msi);
> + return rc;
> +}
> +
> +static const struct ppc4xx_msi_feature ppc4xx_msi_feature = {
> + .ppc4xx_pic_ip = 0,
> + .msiir_offset = 0x140,
> +};
> +
> +static const struct of_device_id ppc4xx_msi_ids[] = {
> + {
> + .compatible = "amcc,ppc4xx-msi",
> + .data = (void *)&ppc4xx_msi_feature,
> + },
> + {}
> +};
> +
> +static struct of_platform_driver ppc4xx_msi_driver = {
> + .name = "ppc4xx-msi",
> + .match_table = ppc4xx_msi_ids,
> + .probe = ppc4xx_msi_probe,
> +};
> +
> +static __init int ppc4xx_msi_init(void)
> +{
> + return of_register_platform_driver(&ppc4xx_msi_driver);
> +}
> +
> +subsys_initcall(ppc4xx_msi_init);
> diff --git a/arch/powerpc/sysdev/ppc4xx_msi.h
> b/arch/powerpc/sysdev/ppc4xx_msi.h new file mode 100644
> index 0000000..e4ae058
> --- /dev/null
> +++ b/arch/powerpc/sysdev/ppc4xx_msi.h
> @@ -0,0 +1,39 @@
> +/*
> + * Copyright (C) 2009 Applied Micro Circuits Corporation.
> + *
> + * Author: Tirumala Marri <tmarri at amcc.com>
> + * Feng Kan <fkan at amcc.com>
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; version 2 of the
> + * License.
> + */
> +#ifndef __PPC4XX_MSI_H__
> +#define __PPC4XX_MSI_H__
> +
> +#include <asm/msi_bitmap.h>
> +
> +#define PEIH_TERMADH 0x00
> +#define PEIH_TERMADL 0x08
> +#define PEIH_MSIED 0x10
> +#define PEIH_MSIMK 0x18
> +#define PEIH_MSIASS 0x20
> +#define PEIH_FLUSH0 0x30
> +#define PEIH_FLUSH1 0x38
> +#define PEIH_CNTRST 0x48
> +
> +#define MSI_DATA_PATTERN 0x44440000
> +
> +struct ppc4xx_msi {
> + struct irq_host *irqhost;
> + unsigned long cascade_irq;
> + u32 msi_addr_lo;
> + u32 msi_addr_hi;
> + void __iomem *msi_regs;
> + u32 feature;
> + struct msi_bitmap bitmap;
> + u32 sdr_base;
> +};
> +
> +#define NR_MSI_IRQS 4
> +#endif /* __PPC4XX_MSI_H__ */
>
Cheers,
Stefan
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de
More information about the Linuxppc-dev
mailing list