[RFC PATCH v4 2/2] powerpc: gamecube/wii: early debugging using usbgecko
Benjamin Herrenschmidt
benh at kernel.crashing.org
Sat Dec 12 09:16:50 EST 2009
On Thu, 2009-12-03 at 21:35 +0100, Albert Herranz wrote:
> Add support for using the USB Gecko adapter as an early debugging
> console on the Nintendo GameCube and Wii video game consoles.
> The USB Gecko is a 3rd party memory card interface adapter that provides
> a EXI (External Interface) to USB serial converter.
>
> Signed-off-by: Albert Herranz <albert_herranz at yahoo.es>
Acked-by: Benjamin Herrenschmidt <benh at kernel.crashing.org>
> ---
> arch/powerpc/Kconfig.debug | 8 +++
> arch/powerpc/include/asm/udbg.h | 1 +
> arch/powerpc/kernel/head_32.S | 25 +++++++++
> arch/powerpc/kernel/udbg.c | 2 +
> arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c | 56 ++++++++++++++++++++
> arch/powerpc/platforms/embedded6xx/usbgecko_udbg.h | 2 +
> 6 files changed, 94 insertions(+), 0 deletions(-)
>
> diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
> index 3b10051..11e385b 100644
> --- a/arch/powerpc/Kconfig.debug
> +++ b/arch/powerpc/Kconfig.debug
> @@ -254,6 +254,14 @@ config PPC_EARLY_DEBUG_CPM
> using a CPM-based serial port. This assumes that the bootwrapper
> has run, and set up the CPM in a particular way.
>
> +config PPC_EARLY_DEBUG_USBGECKO
> + bool "Early debugging through the USB Gecko adapter"
> + depends on GAMECUBE_COMMON
> + select USBGECKO_UDBG
> + help
> + Select this to enable early debugging for Nintendo GameCube/Wii
> + consoles via an external USB Gecko adapter.
> +
> endchoice
>
> config PPC_EARLY_DEBUG_44x_PHYSLOW
> diff --git a/arch/powerpc/include/asm/udbg.h b/arch/powerpc/include/asm/udbg.h
> index cd21e5e..11ae699 100644
> --- a/arch/powerpc/include/asm/udbg.h
> +++ b/arch/powerpc/include/asm/udbg.h
> @@ -51,6 +51,7 @@ extern void __init udbg_init_btext(void);
> extern void __init udbg_init_44x_as1(void);
> extern void __init udbg_init_40x_realmode(void);
> extern void __init udbg_init_cpm(void);
> +extern void __init udbg_init_usbgecko(void);
>
> #endif /* __KERNEL__ */
> #endif /* _ASM_POWERPC_UDBG_H */
> diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
> index 829c3fe..00b89c0 100644
> --- a/arch/powerpc/kernel/head_32.S
> +++ b/arch/powerpc/kernel/head_32.S
> @@ -164,6 +164,9 @@ __after_mmu_off:
> #ifdef CONFIG_PPC_EARLY_DEBUG_CPM
> bl setup_cpm_bat
> #endif
> +#ifdef CONFIG_PPC_EARLY_DEBUG_USBGECKO
> + bl setup_usbgecko_bat
> +#endif
>
> /*
> * Call setup_cpu for CPU 0 and initialize 6xx Idle
> @@ -1203,6 +1206,28 @@ setup_cpm_bat:
> blr
> #endif
>
> +#ifdef CONFIG_PPC_EARLY_DEBUG_USBGECKO
> +setup_usbgecko_bat:
> + /* prepare a BAT for early io */
> +#if defined(CONFIG_GAMECUBE)
> + lis r8, 0x0c00
> +#elif defined(CONFIG_WII)
> + lis r8, 0x0d00
> +#else
> +#error Invalid platform for USB Gecko based early debugging.
> +#endif
> + /*
> + * The virtual address used must match the virtual address
> + * associated to the fixmap entry FIX_EARLY_DEBUG_BASE.
> + */
> + lis r11, 0xfffe /* top 128K */
> + ori r8, r8, 0x002a /* uncached, guarded ,rw */
> + ori r11, r11, 0x3 /* 128K */
> + mtspr SPRN_DBAT1L, r8
> + mtspr SPRN_DBAT1U, r11
> + blr
> +#endif
> +
> #ifdef CONFIG_8260
> /* Jump into the system reset for the rom.
> * We first disable the MMU, and then jump to the ROM reset address.
> diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c
> index fc9af47..e39cad8 100644
> --- a/arch/powerpc/kernel/udbg.c
> +++ b/arch/powerpc/kernel/udbg.c
> @@ -60,6 +60,8 @@ void __init udbg_early_init(void)
> udbg_init_40x_realmode();
> #elif defined(CONFIG_PPC_EARLY_DEBUG_CPM)
> udbg_init_cpm();
> +#elif defined(CONFIG_PPC_EARLY_DEBUG_USBGECKO)
> + udbg_init_usbgecko();
> #endif
>
> #ifdef CONFIG_PPC_EARLY_DEBUG
> diff --git a/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c b/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c
> index ba4c7cc..edc956c 100644
> --- a/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c
> +++ b/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c
> @@ -17,6 +17,7 @@
> #include <asm/io.h>
> #include <asm/prom.h>
> #include <asm/udbg.h>
> +#include <asm/fixmap.h>
>
> #include "usbgecko_udbg.h"
>
> @@ -270,3 +271,58 @@ done:
> of_node_put(np);
> return;
> }
> +
> +#ifdef CONFIG_PPC_EARLY_DEBUG_USBGECKO
> +
> +static phys_addr_t __init ug_early_grab_io_addr(void)
> +{
> +#if defined(CONFIG_GAMECUBE)
> + return 0x0c000000;
> +#elif defined(CONFIG_WII)
> + return 0x0d000000;
> +#else
> +#error Invalid platform for USB Gecko based early debugging.
> +#endif
> +}
> +
> +/*
> + * USB Gecko early debug support initialization for udbg.
> + */
> +void __init udbg_init_usbgecko(void)
> +{
> + void __iomem *early_debug_area;
> + void __iomem *exi_io_base;
> +
> + /*
> + * At this point we have a BAT already setup that enables I/O
> + * to the EXI hardware.
> + *
> + * The BAT uses a virtual address range reserved at the fixmap.
> + * This must match the virtual address configured in
> + * head_32.S:setup_usbgecko_bat().
> + */
> + early_debug_area = (void __iomem *)__fix_to_virt(FIX_EARLY_DEBUG_BASE);
> + exi_io_base = early_debug_area + 0x00006800;
> +
> + /* try to detect a USB Gecko */
> + if (!ug_udbg_probe(exi_io_base))
> + return;
> +
> + /* we found a USB Gecko, load udbg hooks */
> + udbg_putc = ug_udbg_putc;
> + udbg_getc = ug_udbg_getc;
> + udbg_getc_poll = ug_udbg_getc_poll;
> +
> + /*
> + * Prepare again the same BAT for MMU_init.
> + * This allows udbg I/O to continue working after the MMU is
> + * turned on for real.
> + * It is safe to continue using the same virtual address as it is
> + * a reserved fixmap area.
> + */
> + setbat(1, (unsigned long)early_debug_area,
> + ug_early_grab_io_addr(), 128*1024, PAGE_KERNEL_NCG);
> +}
> +
> +#endif /* CONFIG_PPC_EARLY_DEBUG_USBGECKO */
> +
> diff --git a/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.h b/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.h
> index 3929de3..bb6cde4 100644
> --- a/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.h
> +++ b/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.h
> @@ -27,4 +27,6 @@ static inline void __init ug_udbg_init(void)
>
> #endif /* CONFIG_USBGECKO_UDBG */
>
> +void __init udbg_init_usbgecko(void);
> +
> #endif /* __USBGECKO_UDBG_H */
More information about the Linuxppc-dev
mailing list