[PATCH 1/3] powerpc/83xx/suspend: Clear deep_sleeping after devices resume

[Anton Vorontsov]

Currently 83xx PMC driver clears deep_sleeping variable very early,
before devices are resumed. This makes fsl_deep_sleep() unusable in
drivers' resume() callback.

Sure, drivers can store fsl_deep_sleep() value on suspend and use
the stored value on resume. But a better solution is to postpone
clearing the deep_sleeping variable, i.e. move it into finish()
callback.

Signed-off-by: Anton Vorontsov <avorontsov at ru.mvista.com>
Acked-by: Scott Wood <scottwood at freescale.com>
---
 arch/powerpc/platforms/83xx/suspend.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/platforms/83xx/suspend.c b/arch/powerpc/platforms/83xx/suspend.c
index d306f07..b0c2619 100644
--- a/arch/powerpc/platforms/83xx/suspend.c
+++ b/arch/powerpc/platforms/83xx/suspend.c
@@ -194,7 +194,7 @@ out:
 	return ret;
 }
 
-static void mpc83xx_suspend_finish(void)
+static void mpc83xx_suspend_end(void)
 {
 	deep_sleeping = 0;
 }
@@ -278,7 +278,7 @@ static struct platform_suspend_ops mpc83xx_suspend_ops = {
 	.valid = mpc83xx_suspend_valid,
 	.begin = mpc83xx_suspend_begin,
 	.enter = mpc83xx_suspend_enter,
-	.finish = mpc83xx_suspend_finish,
+	.end = mpc83xx_suspend_end,
 };
 
 static int pmc_probe(struct of_device *ofdev,
-- 
1.6.3.3