[PATCH v3] cpm2_pic: Allow correct flow_types for port C interrupts

[Anton Vorontsov]

On Thu, Dec 10, 2009 at 08:52:01AM -0600, Kumar Gala wrote:
> 
> On Dec 10, 2009, at 5:14 AM, Mark Ware wrote:
> 
> > Port C interrupts can be either falling edge, or either edge.
> > Other external interrupts are either falling edge or active low.
> > Tested on a custom 8280 based board.
> > 
> > Signed-off-by: Mark Ware <mware at elphinstone.net>
> > ---
> > Changed in v3:
> > - Cosmetic improvements as suggested by Anton and Scott
> > - Added tested note to changelog
> > 
> > arch/powerpc/sysdev/cpm2_pic.c |   28 +++++++++++++++++++++-------
> > 1 files changed, 21 insertions(+), 7 deletions(-)
> 
> Scott, Anton do you want to add an Ack to this version?

Acked-by: Anton Vorontsov <avorontsov at ru.mvista.com>

Thanks!

-- 
Anton Vorontsov
email: cbouatmailru at gmail.com
irc://irc.freenode.net/bd2