gianfar breaking builds

[Benjamin Herrenschmidt]

On Wed, 2009-12-09 at 14:20 +0530, Kumar Gopalpet-B05799 wrote:
> Hi Ben,
> 
> Can you point to me from where you cloned the tree.
> 
> Also, net-next-2.6 tree was building for me.

This is powerpc-next which contains the current Linus stuff plus the
pending powerpc stuff. If that's fixed in net-next then we shall wait
for Dave to merge it I suppose.

Cheers,
Ben.

> --
> Thanks
> Sandeep
> 
> >-----Original Message-----
> >From: 
> >linuxppc-dev-bounces+sandeep.kumar=freescale.com at lists.ozlabs.o
> >rg 
> >[mailto:linuxppc-dev-bounces+sandeep.kumar=freescale.com at lists.
> >ozlabs.org] On Behalf Of Benjamin Herrenschmidt
> >Sent: Wednesday, December 09, 2009 12:27 PM
> >To: Kumar Gala
> >Cc: linuxppc-dev
> >Subject: gianfar breaking builds
> >
> >In my next (not pushed out yet as I'm writing this but will be 
> >by the time you read it hopefully), I get a build failure:
> >
> >/home/benh/linux-powerpc-test/drivers/net/gianfar.c: In 
> >function 'gfar_netpoll':
> >/home/benh/linux-powerpc-test/drivers/net/gianfar.c:2653: 
> >error: invalid storage class for function 'gfar_interrupt'
> >/home/benh/linux-powerpc-test/drivers/net/gianfar.c:2652: 
> >warning: ISO C90 forbids mixed declarations and code
> >/home/benh/linux-powerpc-test/drivers/net/gianfar.c:2681: 
> >error: invalid storage class for function 'adjust_link'
> >/home/benh/linux-powerpc-test/drivers/net/gianfar.c:2764: 
> >error: invalid storage class for function 'gfar_set_multi'
> >/home/benh/linux-powerpc-test/drivers/net/gianfar.c:2855: 
> >error: invalid storage class for function 'gfar_clear_exact_match'
> >/home/benh/linux-powerpc-test/drivers/net/gianfar.c:2877: 
> >error: invalid storage class for function 'gfar_set_hash_for_addr'
> >/home/benh/linux-powerpc-test/drivers/net/gianfar.c:2898: 
> >error: invalid storage class for function 'gfar_set_mac_for_addr'
> >/home/benh/linux-powerpc-test/drivers/net/gianfar.c:2922: 
> >error: invalid storage class for function 'gfar_error'
> >/home/benh/linux-powerpc-test/drivers/net/gianfar.c:3017: 
> >warning: 'alias' attribute ignored
> >/home/benh/linux-powerpc-test/drivers/net/gianfar.c:3032: 
> >error: invalid storage class for function 'gfar_init'
> >/home/benh/linux-powerpc-test/drivers/net/gianfar.c:3037: 
> >error: invalid storage class for function 'gfar_exit'
> >/home/benh/linux-powerpc-test/drivers/net/gianfar.c:3041: 
> >error: invalid storage class for function '__inittest'
> >/home/benh/linux-powerpc-test/drivers/net/gianfar.c:3041: 
> >warning: 'alias' attribute ignored
> >/home/benh/linux-powerpc-test/drivers/net/gianfar.c:3042: 
> >error: invalid storage class for function '__exittest'
> >/home/benh/linux-powerpc-test/drivers/net/gianfar.c:3042: 
> >warning: ISO C90 forbids mixed declarations and code
> >/home/benh/linux-powerpc-test/drivers/net/gianfar.c:3042: 
> >warning: 'alias' attribute ignored
> >/home/benh/linux-powerpc-test/drivers/net/gianfar.c:3042: 
> >error: expected declaration or statement at end of input
> >make[3]: *** [drivers/net/gianfar.o] Error 1
> >
> >Stephen says that breakage has been in -next for some time...
> >
> >Can you guys sort it out ?
> >
> >Cheers,
> >Ben.
> >
> >
> >_______________________________________________
> >Linuxppc-dev mailing list
> >Linuxppc-dev at lists.ozlabs.org
> >https://lists.ozlabs.org/listinfo/linuxppc-dev
> >