[PATCH 2/5] powerpc/85xx/86xx: Add suspend/resume support

[Anton Vorontsov]

This patch adds suspend/resume support for MPC8540, MPC8569 and
MPC8641D-compatible CPUs.

MPC8540 and MPC8641D-compatible PMCs are trivial: we just write
the SLP bit into the PM control and status register.

MPC8569 is a bit trickier, QE turns off during suspend, thus on
resume we must reload QE microcode and reset QE.

So far we don't support Deep Sleep mode as found in newer MPC85xx
CPUs (i.e. MPC8536). It can be relatively easy implemented though,
and for it we reserve 'mem' suspend type.

Signed-off-by: Anton Vorontsov <avorontsov at ru.mvista.com>
---
 arch/powerpc/Kconfig          |   11 +++-
 arch/powerpc/sysdev/Makefile  |    1 +
 arch/powerpc/sysdev/fsl_pmc.c |  124 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 135 insertions(+), 1 deletions(-)
 create mode 100644 arch/powerpc/sysdev/fsl_pmc.c

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index d00131c..a0743a7 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -212,7 +212,8 @@ config ARCH_HIBERNATION_POSSIBLE
 
 config ARCH_SUSPEND_POSSIBLE
 	def_bool y
-	depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx
+	depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx || \
+		   PPC_85xx || PPC_86xx
 
 config PPC_DCR_NATIVE
 	bool
@@ -642,6 +643,14 @@ config FSL_PCI
 	select PPC_INDIRECT_PCI
 	select PCI_QUIRKS
 
+config FSL_PMC
+	bool
+	default y
+	depends on SUSPEND && (PPC_85xx || PPC_86xx)
+	help
+	  Freescale MPC85xx/MPC86xx power management controller support
+	  (suspend/resume). For MPC83xx see platforms/83xx/suspend.c
+
 config 4xx_SOC
 	bool
 
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 9d4b174..5642924 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_U3_DART)		+= dart_iommu.o
 obj-$(CONFIG_MMIO_NVRAM)	+= mmio_nvram.o
 obj-$(CONFIG_FSL_SOC)		+= fsl_soc.o
 obj-$(CONFIG_FSL_PCI)		+= fsl_pci.o $(fsl-msi-obj-y)
+obj-$(CONFIG_FSL_PMC)		+= fsl_pmc.o
 obj-$(CONFIG_FSL_LBC)		+= fsl_lbc.o
 obj-$(CONFIG_FSL_GTM)		+= fsl_gtm.o
 obj-$(CONFIG_MPC8xxx_GPIO)	+= mpc8xxx_gpio.o
diff --git a/arch/powerpc/sysdev/fsl_pmc.c b/arch/powerpc/sysdev/fsl_pmc.c
new file mode 100644
index 0000000..843c284
--- /dev/null
+++ b/arch/powerpc/sysdev/fsl_pmc.c
@@ -0,0 +1,124 @@
+/*
+ * Suspend/resume support
+ *
+ * Copyright © 2009  MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov at ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/suspend.h>
+#include <linux/device.h>
+#include <linux/of_platform.h>
+#include <linux/firmware.h>
+#include <asm/qe.h>
+
+struct pmc_regs {
+	__be32 devdisr;
+	__be32 devdisr2;
+	__be32 :32;
+	__be32 :32;
+	__be32 pmcsr;
+#define PMCSR_SLP	(1 << 17)
+};
+
+struct pmc_data {
+	unsigned int flags;
+#define PMC_NEED_QE_RELOAD (1 << 0)
+
+	const char *fw_name;
+};
+
+static struct device *pmc_dev;
+static struct pmc_regs __iomem *pmc_regs;
+static const struct pmc_data *pmc_data;
+static struct qe_firmware *pmc_qefw;
+
+static int pmc_suspend_enter(suspend_state_t state)
+{
+	setbits32(&pmc_regs->pmcsr, PMCSR_SLP);
+	/* At this point, the CPU is asleep. */
+
+	/* For 86xx we need to clear the bit on resume, 85xx don't care. */
+	clrbits32(&pmc_regs->pmcsr, PMCSR_SLP);
+
+	if (pmc_qefw) {
+		int ret;
+
+		ret = qe_upload_firmware(pmc_qefw);
+		if (ret)
+			dev_err(pmc_dev, "could not upload firmware\n");
+
+		qe_reset();
+	}
+	return 0;
+}
+
+static int pmc_suspend_valid(suspend_state_t state)
+{
+	if (state != PM_SUSPEND_STANDBY)
+		return 0;
+
+	if (pmc_data && pmc_data->flags & PMC_NEED_QE_RELOAD && !pmc_qefw) {
+		const struct firmware *fw;
+		int ret;
+
+		ret = request_firmware(&fw, pmc_data->fw_name, pmc_dev);
+		if (ret) {
+			dev_err(pmc_dev, "could not request firmware %s\n",
+				pmc_data->fw_name);
+			return 0;
+		}
+
+		pmc_qefw = (struct qe_firmware *)fw->data;
+	}
+
+	return 1;
+}
+
+static struct platform_suspend_ops pmc_suspend_ops = {
+	.valid = pmc_suspend_valid,
+	.enter = pmc_suspend_enter,
+};
+
+static int pmc_probe(struct of_device *ofdev, const struct of_device_id *id)
+{
+	pmc_regs = of_iomap(ofdev->node, 0);
+	if (!pmc_regs)
+		return -ENOMEM;
+
+	pmc_dev = &ofdev->dev;
+	pmc_data = id->data;
+	suspend_set_ops(&pmc_suspend_ops);
+	return 0;
+}
+
+static struct pmc_data mpc8569_pmc_data = {
+	.flags = PMC_NEED_QE_RELOAD,
+	.fw_name = "fsl_qe_ucode_8569.bin",
+};
+
+static const struct of_device_id pmc_ids[] = {
+	{ .compatible = "fsl,mpc8569-pmc", .data = &mpc8569_pmc_data, },
+	{ .compatible = "fsl,mpc8548-pmc", },
+	{ .compatible = "fsl,mpc8641d-pmc", },
+	{ },
+};
+
+static struct of_platform_driver pmc_driver = {
+	.driver.name = "fsl-pmc",
+	.match_table = pmc_ids,
+	.probe = pmc_probe,
+};
+
+static int __init pmc_init(void)
+{
+	return of_register_platform_driver(&pmc_driver);
+}
+device_initcall(pmc_init);
-- 
1.6.3.3