[PATCH 3/3] powerpc/85xx: Add QE USB support for MPC8569E-MDS boards
galak at kernel.crashing.org
Wed Aug 26 00:44:47 EST 2009
On Aug 18, 2009, at 6:28 PM, Anton Vorontsov wrote:
> - Add gpio-controller node for BCSR17, it is used to control USB
> speed and VBUS;
> - Add timer node for QE GTM, needed for USB host;
> - Add usb node itself;
> - Add some probing code for BCSR GPIOs.
> NOTE: QE USB doesn't work on prototype boards, but should work on
> pilot boards if specs and schematics are correct, though we
> don't have the pilot boards to actually test it.
> Signed-off-by: Anton Vorontsov <avorontsov at ru.mvista.com>
> arch/powerpc/boot/dts/mpc8569mds.dts | 45 ++++++++++++++++++++
> arch/powerpc/platforms/85xx/mpc85xx_mds.c | 4 ++
> 2 files changed, 49 insertions(+), 0 deletions(-)
applied to next.
More information about the Linuxppc-dev