[PATCH 1/2] powerpc/405ex: provide necessary fixup function to support cuImage

[Josh Boyer]

On Tue, Aug 18, 2009 at 10:28:03AM +0800, Tiejun Chen wrote:
>For cuImage format it's necessary to provide clock fixups since u-boot will
>not pass necessary clock frequency into the dtb included into cuImage so we 
>implement the clock fixups as defined in the technical documentation for the 
>board and update header file with the basic register definitions. 
>
>Signed-off-by: Tiejun Chen <tiejun.chen at windriver.com>
>---
> arch/powerpc/boot/4xx.c |  142 +++++++++++++++++++++++++++++++++++++++++++++++
> arch/powerpc/boot/4xx.h |    1 +
> arch/powerpc/boot/dcr.h |   12 ++++
> 3 files changed, 155 insertions(+), 0 deletions(-)
>
>diff --git a/arch/powerpc/boot/4xx.c b/arch/powerpc/boot/4xx.c
>index 325b310..b5561b3 100644
>--- a/arch/powerpc/boot/4xx.c
>+++ b/arch/powerpc/boot/4xx.c
>@@ -8,6 +8,10 @@
>  *   Eugene Surovegin <eugene.surovegin at zultys.com> or <ebs at ebshome.net>
>  *   Copyright (c) 2003, 2004 Zultys Technologies
>  *
>+ * Copyright (C) 2009 Wind River Systems, Inc.
>+ *   Updated for supporting PPC405EX on Kilauea.
>+ *   Tiejun Chen <tiejun.chen at windriver.com>
>+ *
>  * This program is free software; you can redistribute it and/or
>  * modify it under the terms of the GNU General Public License
>  * as published by the Free Software Foundation; either version
>@@ -659,3 +663,141 @@ void ibm405ep_fixup_clocks(unsigned int sys_clk)
> 	dt_fixup_clock("/plb/opb/serial at ef600300", uart0);
> 	dt_fixup_clock("/plb/opb/serial at ef600400", uart1);
> }
>+
>+static u8 fwdv_multi_bits[] = {
>+	/* values for:  1 - 16 */
>+	0x01, 0x02, 0x0e, 0x09, 0x04, 0x0b, 0x10, 0x0d, 0x0c, 0x05,
>+	0x06, 0x0f, 0x0a, 0x07, 0x08, 0x03
>+};
>+
>+u32 get_fwdva(unsigned long cpr_fwdv)
>+{
>+	u32 index;
>+
>+	for (index = 0; index < ARRAY_SIZE(fwdv_multi_bits); index++)
>+		if (cpr_fwdv == (u32)fwdv_multi_bits[index])
>+			return index + 1;
>+
>+	return 0;
>+}
>+
>+static u8 fbdv_multi_bits[] = {
>+	/* values for:  1 - 100 */
>+	0x00, 0xff, 0x7e, 0xfd, 0x7a, 0xf5, 0x6a, 0xd5, 0x2a, 0xd4,
>+	0x29, 0xd3, 0x26, 0xcc, 0x19, 0xb3, 0x67, 0xce, 0x1d, 0xbb,
>+	0x77, 0xee, 0x5d, 0xba, 0x74, 0xe9, 0x52, 0xa5, 0x4b, 0x96,
>+	0x2c, 0xd8, 0x31, 0xe3, 0x46, 0x8d, 0x1b, 0xb7, 0x6f, 0xde,
>+	0x3d, 0xfb, 0x76, 0xed, 0x5a, 0xb5, 0x6b, 0xd6, 0x2d, 0xdb,
>+	0x36, 0xec, 0x59, 0xb2, 0x64, 0xc9, 0x12, 0xa4, 0x48, 0x91,
>+	0x23, 0xc7, 0x0e, 0x9c, 0x38, 0xf0, 0x61, 0xc2, 0x05, 0x8b,
>+	0x17, 0xaf, 0x5f, 0xbe, 0x7c, 0xf9, 0x72, 0xe5, 0x4a, 0x95,
>+	0x2b, 0xd7, 0x2e, 0xdc, 0x39, 0xf3, 0x66, 0xcd, 0x1a, 0xb4,
>+	0x68, 0xd1, 0x22, 0xc4, 0x09, 0x93, 0x27, 0xcf, 0x1e, 0xbc,
>+	/* values for:  101 - 200 */
>+	0x78, 0xf1, 0x62, 0xc5, 0x0a, 0x94, 0x28, 0xd0, 0x21, 0xc3,
>+	0x06, 0x8c, 0x18, 0xb0, 0x60, 0xc1, 0x02, 0x84, 0x08, 0x90,
>+	0x20, 0xc0, 0x01, 0x83, 0x07, 0x8f, 0x1f, 0xbf, 0x7f, 0xfe,
>+	0x7d, 0xfa, 0x75, 0xea, 0x55, 0xaa, 0x54, 0xa9, 0x53, 0xa6,
>+	0x4c, 0x99, 0x33, 0xe7, 0x4e, 0x9d, 0x3b, 0xf7, 0x6e, 0xdd,
>+	0x3a, 0xf4, 0x69, 0xd2, 0x25, 0xcb, 0x16, 0xac, 0x58, 0xb1,
>+	0x63, 0xc6, 0x0d, 0x9b, 0x37, 0xef, 0x5e, 0xbd, 0x7b, 0xf6,
>+	0x6d, 0xda, 0x35, 0xeb, 0x56, 0xad, 0x5b, 0xb6, 0x6c, 0xd9,
>+	0x32, 0xe4, 0x49, 0x92, 0x24, 0xc8, 0x11, 0xa3, 0x47, 0x8e,
>+	0x1c, 0xb8, 0x70, 0xe1, 0x42, 0x85, 0x0b, 0x97, 0x2f, 0xdf,
>+	/* values for:  201 - 255 */
>+	0x3e, 0xfc, 0x79, 0xf2, 0x65, 0xca, 0x15, 0xab, 0x57, 0xae,
>+	0x5c, 0xb9, 0x73, 0xe6, 0x4d, 0x9a, 0x34, 0xe8, 0x51, 0xa2,
>+	0x44, 0x89, 0x13, 0xa7, 0x4f, 0x9e, 0x3c, 0xf8, 0x71, 0xe2,
>+	0x45, 0x8a, 0x14, 0xa8, 0x50, 0xa1, 0x43, 0x86, 0x0c, 0x98,
>+	0x30, 0xe0, 0x41, 0x82, 0x04, 0x88, 0x10, 0xa0, 0x40, 0x81,
>+	0x03, 0x87, 0x0f, 0x9f, 0x3f  /* END */
>+};
>+
>+u32 get_fbdv(unsigned long cpr_fbdv)
>+{
>+	u32 index;
>+
>+	for (index = 0; index < ARRAY_SIZE(fbdv_multi_bits); index++)
>+		if (cpr_fbdv == (u32)fbdv_multi_bits[index])
>+			return index + 1;
>+
>+	return 0;
>+}

Is this generic?  Can we the function and value arrays to get the fbdv for
all 4xx boards and have the right values pop out?  If not, then all of these
need to be prefixed with ibm405ex_.

>diff --git a/arch/powerpc/boot/dcr.h b/arch/powerpc/boot/dcr.h
>index 95b9f53..ba41624 100644
>--- a/arch/powerpc/boot/dcr.h
>+++ b/arch/powerpc/boot/dcr.h
>@@ -153,6 +153,18 @@ static const unsigned long sdram_bxcr[] = { SDRAM0_B0CR, SDRAM0_B1CR,
> #define DCRN_CPC0_PLLMR1  0xf4
> #define DCRN_CPC0_UCR     0xf5
>
>+/* 405EX Clocking Control regs */
>+#define CPR0_CLKUPD     0x0020
>+#define CPR0_PLLC       0x0040
>+#define CPR0_PLLD       0x0060
>+#define CPR0_CPUD       0x0080
>+#define CPR0_PLBD       0x00a0
>+#define CPR0_OPBD       0x00c0
>+#define CPR0_PERD       0x00e0
>+#define CPR0_AHBD       0x0100
>+#define CPR0_ICFG       0x0140

You duplicated the #defines right below this.  Just change the comment for
the already existing defines to say "440GX/405EX Clock Control regs".  You
don't need to add CPR0_ICFG either, since you don't use it anywhere.

josh