simple gpio driver

Anton Vorontsov avorontsov at ru.mvista.com
Tue Aug 18 09:38:33 EST 2009


Oops, I missed that patch, sorry.

On Mon, Aug 17, 2009 at 03:18:37PM -0600, Grant Likely wrote:
> On Wed, Aug 12, 2009 at 11:49 PM, Heiko Schocher<hs at denx.de> wrote:
> > Hello Anton,
> >
> > i am trying to use the arch/powerpc/sysdev/simple_gpio.c driver,
> > for accessing some gpios, and found, that u8_gpio_get()
> > returns not only a 1 or a 0, instead it returns the real bit
> > position from the gpio:
> >
> > gpio    return
> > base    value
> > 0       0/0x01
> > 1       0/0x02
> > 2       0/0x04
> > 3       0/0x08
> > 4       0/0x10
> > 5       0/0x20
> > 6       0/0x40
> > 7       0/0x80
> >
> > I also use the arch/powerpc/platforms/52xx/mpc52xx_gpio.c and
> > mpc52xx_gpt.c drivers, they all return for a gpio just a 1 or 0,

There is also arch/powerpc/sysdev/qe_lib/gpio.c and
arch/powerpc/sysdev/mpc8xxx_gpio.c that don't do that.

> > which seems correct to me, because a gpio can have only 1 or 0
> > as state ... what do you think?
> 
> I think returning '1' is perhaps slightly 'better' (however you define
> that), but I don't think the caller should make any assumptions beyond
> zero/non-zero.

Yep. So I don't think that the patch is needed.

Thanks,

-- 
Anton Vorontsov
email: cbouatmailru at gmail.com
irc://irc.freenode.net/bd2


More information about the Linuxppc-dev mailing list