[PATCH 1/3] Support for PCI Express reset type

[Jesse Barnes]

On Thu, 30 Jul 2009 15:33:21 -0700
Mike Mason <mmlnx at us.ibm.com> wrote:

> This is the first of three patches that implement a bit field that
> PCI Express device drivers can use to indicate they need a
> fundamental reset during error recovery.
> 
> By default, the EEH framework on powerpc does what's known as a "hot
> reset" during recovery of a PCI Express device.  We've found a case
> where the device needs a "fundamental reset" to recover properly.
> The current PCI error recovery and EEH frameworks do not support this
> distinction.
> 
> The attached patch (courtesy of Richard Lary) adds a bit field to
> pci_dev that indicates whether the device requires a fundamental
> reset during recovery.
> 
> These patches supersede the previously submitted patch that
> implemented a fundamental reset bit field. 
> 
> Please review and let me know of any concerns.
> 
> Signed-off-by: Mike Mason <mmlnx at us.ibm.com>
> Signed-off-by: Richard Lary <rlary at us.ibm.com>

Ok, applied this series to my linux-next branch, it looks pretty
reasonable to me.

For future patches, please cc me, and include the subsystem in the
subject, along with a specific description of the patch, e.g. "PCI: add
PCIe fundamental reset interface", "PCI: document PCIe fundamental
reset", or for arch specific patches, "PCI/powerpc: implement support
for PCIe fundamental reset".

Thanks,
-- 
Jesse Barnes, Intel Open Source Technology Center