[PATCH][powerpc/85xx] P2020RDB Platform Support Added

[Felix Radensky]

Aggrwal Poonam-B10812 wrote:
>  
>
>   
>> -----Original Message-----
>> From: Felix Radensky [mailto:felix at embedded-sol.com] 
>> Sent: Thursday, August 06, 2009 11:56 AM
>> To: Aggrwal Poonam-B10812
>> Cc: linuxppc-release at webnode01-prod1.am.freescale.net; 
>> linuxppc-dev at ozlabs.org
>> Subject: Re: [PATCH][powerpc/85xx] P2020RDB Platform Support Added
>>
>> Hi, Poonam
>>
>> Poonam Aggrwal wrote:
>>     
>>> Adds P2020RDB basic support in linux.
>>> Overview of P2020RDB platform
>>> 	- DDR
>>> 	  DDR2 1G
>>> 	- NOR Flash
>>> 	  16MByte
>>> 	- NAND Flash
>>> 	  32MByte
>>> 	- 3 Ethernet interfaces
>>> 	  1) etSEC1
>>> 		- RGMII
>>> 		- connected to a 5 port Vitesse Switch(VSC7385)
>>> 		- Switch is memory mapped through eLBC interface(CS#2)
>>> 		- IRQ1
>>> 	  2) etSEC2
>>> 		- SGMII
>>> 		- connected to VSC8221
>>> 		- IRQ2
>>> 	  3) etSEC3
>>> 		- RGMII
>>> 		- connected to VSC8641
>>> 		- IRQ3
>>> 	- 2 1X PCIe interfaces
>>> 	- SD/MMC ,USB
>>> 	- SPI EEPROM
>>> 	- Serial I2C EEPROM
>>>
>>> Signed-off-by: Poonam Aggrwal <poonam.aggrwal at freescale.com>
>>> ---
>>> based on 
>>>       
>> http://www.kernel.org/pub/scm/linux/kernel/git/galak/powerpc.git
>>     
>>>  arch/powerpc/boot/dts/p2020rdb.dts        |  586 
>>>       
>> +++++++++++++++++++++++++++++
>>     
>>>  arch/powerpc/configs/mpc85xx_defconfig    |    1 +
>>>  arch/powerpc/platforms/85xx/Kconfig       |    9 +
>>>  arch/powerpc/platforms/85xx/Makefile      |    3 +-
>>>  arch/powerpc/platforms/85xx/mpc85xx_rdb.c |  141 +++++++
>>>  5 files changed, 739 insertions(+), 1 deletions(-)  create mode 
>>> 100644 arch/powerpc/boot/dts/p2020rdb.dts
>>>  create mode 100644 arch/powerpc/platforms/85xx/mpc85xx_rdb.c
>>>
>>> diff --git a/arch/powerpc/boot/dts/p2020rdb.dts 
>>> b/arch/powerpc/boot/dts/p2020rdb.dts
>>> new file mode 100644
>>> index 0000000..d6d8131
>>> --- /dev/null
>>> +++ b/arch/powerpc/boot/dts/p2020rdb.dts
>>> @@ -0,0 +1,586 @@
>>> +/*
>>> + * P2020 RDB Device Tree Source
>>> + *
>>> + * Copyright 2009 Freescale Semiconductor Inc.
>>> + *
>>> + * This program is free software; you can redistribute  it and/or 
>>> +modify it
>>> + * under  the terms of  the GNU General  Public License as 
>>>       
>> published 
>>     
>>> +by the
>>> + * Free Software Foundation;  either version 2 of the  License, or 
>>> +(at your
>>> + * option) any later version.
>>> + */
>>> +
>>> +/dts-v1/;
>>> +/ {
>>> +	model = "fsl,P2020";
>>> +	compatible = "fsl,P2020RDB";
>>> +	#address-cells = <2>;
>>> +	#size-cells = <2>;
>>> +
>>> +	aliases {
>>> +		ethernet0 = &enet0;
>>> +		ethernet1 = &enet1;
>>> +		ethernet2 = &enet2;
>>> +		serial0 = &serial0;
>>> +		serial1 = &serial1;
>>> +		pci0 = &pci0;
>>> +		pci1 = &pci1;
>>> +	};
>>> +
>>> +	cpus {
>>> +		#address-cells = <1>;
>>> +		#size-cells = <0>;
>>> +
>>> +		PowerPC,P2020 at 0 {
>>> +			device_type = "cpu";
>>> +			reg = <0x0>;
>>> +			next-level-cache = <&L2>;
>>> +		};
>>> +
>>> +		PowerPC,P2020 at 1 {
>>> +			device_type = "cpu";
>>> +			reg = <0x1>;
>>> +			next-level-cache = <&L2>;
>>> +		};
>>> +	};
>>> +
>>> +	memory {
>>> +		device_type = "memory";
>>> +	};
>>> +
>>> +	localbus at ffe05000 {
>>> +		#address-cells = <2>;
>>> +		#size-cells = <1>;
>>> +		compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus";
>>> +		reg = <0 0xffe05000 0 0x1000>;
>>> +		interrupts = <19 2>;
>>> +		interrupt-parent = <&mpic>;
>>> +
>>> +		/* NOR and NAND Flashes */
>>> +		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
>>> +			  0x1 0x0 0x0 0xffa00000 0x00040000
>>> +			  0x2 0x0 0x0 0xffb00000 0x08000000>;
>>>   
>>>       
>> The comment is a bit misleading, CS2 is L2 switch.
>>     
> Okay will modify it. 
>   
>> Also, are 
>> you sure the CS2 range shouldn't look like
>>       
>> 0x2 0x0 0x0 0xffb00000 0x00020000
>>
>> That's what L2switch reg property suggests.  
>>     
> Thanks , for catching it!...this is a bug , I changed the size in the
> reg property but not in the ranges.        
>   
>>> +
>>> +		nor at 0,0 {
>>> +			#address-cells = <1>;
>>> +			#size-cells = <1>;
>>> +			compatible = "cfi-flash";
>>> +			reg = <0x0 0x0 0x1000000>;
>>> +			bank-width = <2>;
>>> +			device-width = <1>;
>>> +
>>> +			vitesse-7385-fw at 0 {
>>> +				/* This location must not be altered  */
>>> +				/* 256KB for Vitesse 7385 
>>>       
>> Switch firmware */
>>     
>>> +				reg = <0x0 0x00040000>;
>>> +				label = "NOR (RO) Vitesse-7385 
>>>       
>> Firmware";
>>     
>>> +				read-only;
>>> +			};
>>>   
>>>       
>> Partitions should be declared as
>>
>>        partition at 0 {
>>                    reg = ...
>>                    label = ...
>>                    ...
>>         } 
>>     
> Doing it this way is good from readability perspective, but we generally
> do not use this convention in our platforms eg 8572DS, etc
>   
>
>   

I think the DTS for 8572 should be fixed as well. The OF partition 
parser does
not recognize your syntax and partitions will not appear in /proc/mtd. 
I've encountered
this recently with mainline port of 8536DS. I've tried to copy partition 
info from 8572
and it didn't work until I've switched to new syntax.

Felix.