[PATCH v3 09/13] net: Rework ucc_geth driver to use of_mdio infrastructure
Joakim Tjernlund
Joakim.Tjernlund at transmode.se
Sun Apr 26 19:00:27 EST 2009
Change in fixed link case, see inline.
>
> From: Grant Likely <grant.likely at secretlab.ca>
>
> This patch simplifies the driver by making use of more common code.
>
> Signed-off-by: Grant Likely <grant.likely at secretlab.ca>
> Acked-by: Andy Fleming <afleming at freescale.com>
> ---
>
> drivers/net/ucc_geth.c | 47
++++++++++++-----------------------------------
> drivers/net/ucc_geth.h | 2 +-
> 2 files changed, 13 insertions(+), 36 deletions(-)
>
>
> diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
> index d3f39e8..195b490 100644
> --- a/drivers/net/ucc_geth.c
> +++ b/drivers/net/ucc_geth.c
> @@ -27,6 +27,7 @@
> #include <linux/mii.h>
> #include <linux/phy.h>
> #include <linux/workqueue.h>
> +#include <linux/of_mdio.h>
> #include <linux/of_platform.h>
>
> #include <asm/uaccess.h>
> @@ -1542,12 +1543,14 @@ static int init_phy(struct net_device *dev)
> priv->oldspeed = 0;
> priv->oldduplex = -1;
>
> - phydev = phy_connect(dev, ug_info->phy_bus_id, &adjust_link, 0,
> - priv->phy_interface);
> + if (!ug_info->phy_node)
> + return 0;
>
> - if (IS_ERR(phydev)) {
> + phydev = of_phy_connect(dev, ug_info->phy_node, &adjust_link, 0,
> + priv->phy_interface);
> + if (!phydev) {
> printk("%s: Could not attach to PHY\n", dev->name);
> - return PTR_ERR(phydev);
> + return -ENODEV;
> }
>
> phydev->supported &= (ADVERTISED_10baseT_Half |
> @@ -3519,14 +3522,12 @@ static int ucc_geth_probe(struct of_device*
ofdev, const struct of_device_id *ma
> {
> struct device *device = &ofdev->dev;
> struct device_node *np = ofdev->node;
> - struct device_node *mdio;
> struct net_device *dev = NULL;
> struct ucc_geth_private *ugeth = NULL;
> struct ucc_geth_info *ug_info;
> struct resource res;
> struct device_node *phy;
> int err, ucc_num, max_speed = 0;
> - const phandle *ph;
> const u32 *fixed_link;
> const unsigned int *prop;
> const char *sprop;
> @@ -3626,45 +3627,21 @@ static int ucc_geth_probe(struct of_device*
ofdev, const struct of_device_id *ma
> ug_info->uf_info.irq = irq_of_parse_and_map(np, 0);
> fixed_link = of_get_property(np, "fixed-link", NULL);
> if (fixed_link) {
> - snprintf(ug_info->phy_bus_id, sizeof(ug_info->phy_bus_id),
> - PHY_ID_FMT, "0", fixed_link[0]);
> phy = NULL;
phy assigned to NULL ...
> } else {
> - char bus_name[MII_BUS_ID_SIZE];
> -
> - ph = of_get_property(np, "phy-handle", NULL);
> - phy = of_find_node_by_phandle(*ph);
> -
> + phy = of_parse_phandle(np, "phy-handle", 0);
> if (phy == NULL)
> return -ENODEV;
> -
> - /* set the PHY address */
> - prop = of_get_property(phy, "reg", NULL);
> - if (prop == NULL)
> - return -1;
> -
> - /* Set the bus id */
> - mdio = of_get_parent(phy);
> -
> - if (mdio == NULL)
> - return -ENODEV;
> -
> - err = of_address_to_resource(mdio, 0, &res);
> -
> - if (err) {
> - of_node_put(mdio);
> - return err;
> - }
> - fsl_pq_mdio_bus_name(bus_name, mdio);
> - of_node_put(mdio);
> - snprintf(ug_info->phy_bus_id, sizeof(ug_info->phy_bus_id),
> - "%s:%02x", bus_name, *prop);
> }
> + ug_info->phy_node = phy;
>
> /* get the phy interface type, or default to MII */
> prop = of_get_property(np, "phy-connection-type", NULL);
> if (!prop) {
> /* handle interface property present in old trees */
> + if (!phy)
> + return -ENODEV;
.. here an error is returned. Is this intentional?
> +
> prop = of_get_property(phy, "interface", NULL);
> if (prop != NULL) {
> phy_interface = enet_to_phy_interface[*prop];
> diff --git a/drivers/net/ucc_geth.h b/drivers/net/ucc_geth.h
> index 2f8ee7c..bc31975 100644
> --- a/drivers/net/ucc_geth.h
> +++ b/drivers/net/ucc_geth.h
> @@ -1100,7 +1100,7 @@ struct ucc_geth_info {
> u32 eventRegMask;
> u16 pausePeriod;
> u16 extensionField;
> - char phy_bus_id[BUS_ID_SIZE];
> + struct device_node *phy_node;
> u8 weightfactor[NUM_TX_QUEUES];
> u8 interruptcoalescingmaxvalue[NUM_RX_QUEUES];
> u8 l2qt[UCC_GETH_VLAN_PRIORITY_MAX];
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev at ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
>
>
More information about the Linuxppc-dev
mailing list