[PATCH] [net, 83xx] ucc_geth.c: Fix upsmr setting in RMII mode

[Gridish Shlomi-RM96313]

It is correct.
Thanks
 

> -----Original Message-----
> From: Heiko Schocher [mailto:hs at denx.de] 
> Sent: Tuesday, April 21, 2009 11:37 AM
> To: Li Yang-R58472
> Cc: Gridish Shlomi-RM96313; Kumar Gala; 
> netdev at vger.kernel.org; linuxppc-dev at ozlabs.org
> Subject: [PATCH] [net, 83xx] ucc_geth.c: Fix upsmr setting in 
> RMII mode
> 
> If using the UCC on a MPC8360 in RMII mode, don;t set 
> UCC_GETH_UPSMR_RPM bit in the upsmr register.
> 
> Signed-off-by: Heiko Schocher <hs at denx.de>
> ---
>  drivers/net/ucc_geth.c |    3 ++-
>  1 files changed, 2 insertions(+), 1 deletions(-)
> 
> diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c 
> index d3f39e8..44f8392 100644
> --- a/drivers/net/ucc_geth.c
> +++ b/drivers/net/ucc_geth.c
> @@ -1394,7 +1394,8 @@ static int adjust_enet_interface(struct 
> ucc_geth_private *ugeth)
>  	    (ugeth->phy_interface == PHY_INTERFACE_MODE_RGMII_RXID) ||
>  	    (ugeth->phy_interface == PHY_INTERFACE_MODE_RGMII_TXID) ||
>  	    (ugeth->phy_interface == PHY_INTERFACE_MODE_RTBI)) {
> -		upsmr |= UCC_GETH_UPSMR_RPM;
> +		if (ugeth->phy_interface != PHY_INTERFACE_MODE_RMII)
> +			upsmr |= UCC_GETH_UPSMR_RPM;
>  		switch (ugeth->max_speed) {
>  		case SPEED_10:
>  			upsmr |= UCC_GETH_UPSMR_R10M;
> --
> 1.6.0.6
> 
> -- 
> DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
>