RFC Patch: Use x86 init_hwif in the alim15x3 for x86-like PowerPC systems

[Roderick Colenbrander]

On Fri, Apr 17, 2009 at 12:04 AM, Anton Vorontsov
<avorontsov at ru.mvista.com> wrote:
> On Thu, Apr 16, 2009 at 11:27:34PM +0200, Roderick Colenbrander wrote:
>> On Thu, Apr 16, 2009 at 10:57 PM, Anton Vorontsov
>> <avorontsov at ru.mvista.com> wrote:
>> > On Thu, Apr 16, 2009 at 09:30:00PM +0200, Bartlomiej Zolnierkiewicz wrote:
>> >>
>> >> Hi,
>> >>
>> >> On Wednesday 15 April 2009 16:34:22 Roderick Colenbrander wrote:
>> >> > Hi,
>> >> >
>> >> > I'm using a Xilinx ML510 it features a PowerPC 440 cpu inside a
>> >> > Virtex-5 FPGA. The board also contains a ALI M1533 south bridge
>> >> > for IDE, USB and Audio. I did a lot of work to get the pci bus working
>> >> > on this board and it works correctly but the default init code
>> >> > of the alim15x3 driver doesn't work for me. The driver explicitly
>> >> > disabled some initialization code for powerpc after uncommenting this
>> >> > code it works properly. Benjamin Herrenschmidt and I think this
>> >> > !CONFIG_PPC check should be removed because the system behaves
>> >> > like a real 'x86' system (also the i8259 interrupt controller is used).
>> >>
>> >> Ben, I guess you are OK with the change and there are no longer other
>> >> platforms requiring CONFIG_PPC check below?  [I don't see your ACK here]
>> >
>> > I'd like to nak this patch. It'll break MPC8610HPCD boards.
>> >
>> > See commit 6d1cee44361b8d06ccd1812e80448d86ae60dfe3
>> >
>> > I'm not sure how should we handle this for Xilinx PPC, MPC8610
>> > PPC and Sparc all at the same time, but it's obvious that #ifdef
>> > isn't enough any longer...
>> >
>> >
>> >
>>
>> If it is really a board specific issue (in case of powerpc it appears
>> to be one) we could also use the default_irq override in ppc_md. What
>> do you think?
>
> Um, I don't see "default_irq" in the ppc_md. Do you want to add one?
>
> I wonder if DECLARE_PCI_FIXUP_*() mechanism will work... see
> arch/powerpc/platforms/fsl_uli1575.c as an example for board-specific
> PCI fixups.

It seems default_irq was the name on old kernels. These days it is
called pci_get_legacy_ide_irq.

Roderick