RFC Patch: Use x86 init_hwif in the alim15x3 for x86-like PowerPC systems

Anton Vorontsov avorontsov at ru.mvista.com
Fri Apr 17 06:57:35 EST 2009


On Thu, Apr 16, 2009 at 09:30:00PM +0200, Bartlomiej Zolnierkiewicz wrote:
> 
> Hi,
> 
> On Wednesday 15 April 2009 16:34:22 Roderick Colenbrander wrote:
> > Hi,
> > 
> > I'm using a Xilinx ML510 it features a PowerPC 440 cpu inside a
> > Virtex-5 FPGA. The board also contains a ALI M1533 south bridge
> > for IDE, USB and Audio. I did a lot of work to get the pci bus working
> > on this board and it works correctly but the default init code
> > of the alim15x3 driver doesn't work for me. The driver explicitly
> > disabled some initialization code for powerpc after uncommenting this
> > code it works properly. Benjamin Herrenschmidt and I think this
> > !CONFIG_PPC check should be removed because the system behaves
> > like a real 'x86' system (also the i8259 interrupt controller is used).
> 
> Ben, I guess you are OK with the change and there are no longer other
> platforms requiring CONFIG_PPC check below?  [I don't see your ACK here]

I'd like to nak this patch. It'll break MPC8610HPCD boards.

See commit 6d1cee44361b8d06ccd1812e80448d86ae60dfe3

I'm not sure how should we handle this for Xilinx PPC, MPC8610
PPC and Sparc all at the same time, but it's obvious that #ifdef
isn't enough any longer...



> > Regards,
> > Roderick Colenbrander
> > 
> > 
> > From 1c40c2f1485ecd3bc5ad7a3af537cb94de0877c3 Mon Sep 17 00:00:00 2001
> > From: Roderick Colenbrander <thunderbird2k at gmail.com>
> > Date: Wed, 15 Apr 2009 10:45:17 +0200
> > Subject: [PATCH] Use the 'x86' init_hwif code in the alim15x3 for
> > x86-like PowerPC boards like Xilinx ML310/410/510.
> 
> Roderick, please add your "Signed-off-by:" line
> (per Documentation/SubmittingPatches).
> 
> Thanks.
> 
> > ---
> >  drivers/ide/alim15x3.c |    9 +++++----
> >  1 files changed, 5 insertions(+), 4 deletions(-)
> > 
> > diff --git a/drivers/ide/alim15x3.c b/drivers/ide/alim15x3.c
> > index 537da1c..9176c0f 100644
> > --- a/drivers/ide/alim15x3.c
> > +++ b/drivers/ide/alim15x3.c
> > @@ -402,14 +402,15 @@ static u8 ali_cable_detect(ide_hwif_t *hwif)
> >      return cbl;
> >  }
> > 
> > -#if !defined(CONFIG_SPARC64) && !defined(CONFIG_PPC)
> > +#if !defined(CONFIG_SPARC64)
> >  /**
> >   *    init_hwif_ali15x3    -    Initialize the ALI IDE x86 stuff
> >   *    @hwif: interface to configure
> >   *
> >   *    Obtain the IRQ tables for an ALi based IDE solution on the PC
> > - *    class platforms. This part of the code isn't applicable to the
> > - *    Sparc and PowerPC systems.
> > + *    class platforms. This part of the code isn't applicable to
> > + *    Sparc systems. It is usable on 'x86-like' PowerPC systems
> > + *      which use a Ali M15x3 south bridge like e.g. Xilinx ML310/410/510.
> >   */
> > 
> >  static void __devinit init_hwif_ali15x3 (ide_hwif_t *hwif)
> > @@ -455,7 +456,7 @@ static void __devinit init_hwif_ali15x3 (ide_hwif_t *hwif)
> >  }
> >  #else
> >  #define init_hwif_ali15x3 NULL
> > -#endif /* !defined(CONFIG_SPARC64) && !defined(CONFIG_PPC) */
> > +#endif /* !defined(CONFIG_SPARC64) */
> > 
> >  /**
> >   *    init_dma_ali15x3    -    set up DMA on ALi15x3
> > --
> > 1.5.6.3

-- 
Anton Vorontsov
email: cbouatmailru at gmail.com
irc://irc.freenode.net/bd2



More information about the Linuxppc-dev mailing list