Patch 2/2: Add Xilinx ML510 reference design support [attempt2]
Roderick Colenbrander
thunderbird2k at gmail.com
Wed Apr 15 18:42:17 EST 2009
Hi,
This is an updated version of my patch from yesterday it contains some fixes. I had some c++ style comments
left in my previous version of this patch and there was a small error in the dts file.
Regards,
Roderick Colenbrander
>From 018041061bc233c09340eff20fcd4e8bc75da1d3 Mon Sep 17 00:00:00 2001
From: Roderick Colenbrander <thunderbird2k at gmail.com>
Date: Tue, 14 Apr 2009 15:49:32 +0200
Subject: [PATCH] Add Xilinx ML510 reference design support.
---
arch/powerpc/boot/dts/virtex440-ml510.dts | 452 +++++++++++++++++++++++++++++
arch/powerpc/platforms/44x/Kconfig | 10 +
arch/powerpc/platforms/44x/Makefile | 1 +
arch/powerpc/platforms/44x/ml510.c | 165 +++++++++++
4 files changed, 628 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/boot/dts/virtex440-ml510.dts
create mode 100644 arch/powerpc/platforms/44x/ml510.c
diff --git a/arch/powerpc/boot/dts/virtex440-ml510.dts b/arch/powerpc/boot/dts/virtex440-ml510.dts
new file mode 100644
index 0000000..908517a
--- /dev/null
+++ b/arch/powerpc/boot/dts/virtex440-ml510.dts
@@ -0,0 +1,452 @@
+/*
+ * Xilinx ML510 Reference Design support
+ * This DTS file was created for the ml510_bsb1_pcores_ppc440 reference design.
+ * The reference design contains a bug which prevent PCI DMA from working properly.
+ * A description of the bug is given in the plbv46_pci section. It needs to be fixed
+ * by the user until Xilinx updates their reference design.
+ *
+ * Copyright 2009, Roderick Colenbrander
+ */
+
+/dts-v1/;
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "xlnx,ml510-ref-design";
+ dcr-parent = <&ppc440_0>;
+ model = "testing";
+ DDR2_SDRAM_DIMM0: memory at 0 {
+ device_type = "memory";
+ reg = < 0x0 0x20000000 >;
+ } ;
+ alias {
+ ethernet0 = &Hard_Ethernet_MAC;
+ serial0 = &RS232_Uart_1;
+ } ;
+ chosen {
+ bootargs = "console=ttyS0 root=/dev/ram";
+ linux,stdout-path = "/plb at 0/serial at 83e00000";
+ } ;
+ cpus {
+ #address-cells = <1>;
+ #cpus = <0x1>;
+ #size-cells = <0>;
+ ppc440_0: cpu at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clock-frequency = <300000000>;
+ compatible = "PowerPC,440", "ibm,ppc440";
+ d-cache-line-size = <0x20>;
+ d-cache-size = <0x8000>;
+ dcr-access-method = "native";
+ dcr-controller ;
+ device_type = "cpu";
+ i-cache-line-size = <0x20>;
+ i-cache-size = <0x8000>;
+ model = "PowerPC,440";
+ reg = <0>;
+ timebase-frequency = <300000000>;
+ xlnx,apu-control = <0x2000>;
+ xlnx,apu-udi-0 = <0x0>;
+ xlnx,apu-udi-1 = <0x0>;
+ xlnx,apu-udi-10 = <0x0>;
+ xlnx,apu-udi-11 = <0x0>;
+ xlnx,apu-udi-12 = <0x0>;
+ xlnx,apu-udi-13 = <0x0>;
+ xlnx,apu-udi-14 = <0x0>;
+ xlnx,apu-udi-15 = <0x0>;
+ xlnx,apu-udi-2 = <0x0>;
+ xlnx,apu-udi-3 = <0x0>;
+ xlnx,apu-udi-4 = <0x0>;
+ xlnx,apu-udi-5 = <0x0>;
+ xlnx,apu-udi-6 = <0x0>;
+ xlnx,apu-udi-7 = <0x0>;
+ xlnx,apu-udi-8 = <0x0>;
+ xlnx,apu-udi-9 = <0x0>;
+ xlnx,dcr-autolock-enable = <0x1>;
+ xlnx,dcu-rd-ld-cache-plb-prio = <0x0>;
+ xlnx,dcu-rd-noncache-plb-prio = <0x0>;
+ xlnx,dcu-rd-touch-plb-prio = <0x0>;
+ xlnx,dcu-rd-urgent-plb-prio = <0x0>;
+ xlnx,dcu-wr-flush-plb-prio = <0x0>;
+ xlnx,dcu-wr-store-plb-prio = <0x0>;
+ xlnx,dcu-wr-urgent-plb-prio = <0x0>;
+ xlnx,dma0-control = <0x0>;
+ xlnx,dma0-plb-prio = <0x0>;
+ xlnx,dma0-rxchannelctrl = <0x1010000>;
+ xlnx,dma0-rxirqtimer = <0x3ff>;
+ xlnx,dma0-txchannelctrl = <0x1010000>;
+ xlnx,dma0-txirqtimer = <0x3ff>;
+ xlnx,dma1-control = <0x0>;
+ xlnx,dma1-plb-prio = <0x0>;
+ xlnx,dma1-rxchannelctrl = <0x1010000>;
+ xlnx,dma1-rxirqtimer = <0x3ff>;
+ xlnx,dma1-txchannelctrl = <0x1010000>;
+ xlnx,dma1-txirqtimer = <0x3ff>;
+ xlnx,dma2-control = <0x0>;
+ xlnx,dma2-plb-prio = <0x0>;
+ xlnx,dma2-rxchannelctrl = <0x1010000>;
+ xlnx,dma2-rxirqtimer = <0x3ff>;
+ xlnx,dma2-txchannelctrl = <0x1010000>;
+ xlnx,dma2-txirqtimer = <0x3ff>;
+ xlnx,dma3-control = <0x0>;
+ xlnx,dma3-plb-prio = <0x0>;
+ xlnx,dma3-rxchannelctrl = <0x1010000>;
+ xlnx,dma3-rxirqtimer = <0x3ff>;
+ xlnx,dma3-txchannelctrl = <0x1010000>;
+ xlnx,dma3-txirqtimer = <0x3ff>;
+ xlnx,endian-reset = <0x0>;
+ xlnx,generate-plb-timespecs = <0x1>;
+ xlnx,icu-rd-fetch-plb-prio = <0x0>;
+ xlnx,icu-rd-spec-plb-prio = <0x0>;
+ xlnx,icu-rd-touch-plb-prio = <0x0>;
+ xlnx,interconnect-imask = <0xffffffff>;
+ xlnx,mplb-allow-lock-xfer = <0x1>;
+ xlnx,mplb-arb-mode = <0x0>;
+ xlnx,mplb-awidth = <0x20>;
+ xlnx,mplb-counter = <0x500>;
+ xlnx,mplb-dwidth = <0x80>;
+ xlnx,mplb-max-burst = <0x8>;
+ xlnx,mplb-native-dwidth = <0x80>;
+ xlnx,mplb-p2p = <0x0>;
+ xlnx,mplb-prio-dcur = <0x2>;
+ xlnx,mplb-prio-dcuw = <0x3>;
+ xlnx,mplb-prio-icu = <0x4>;
+ xlnx,mplb-prio-splb0 = <0x1>;
+ xlnx,mplb-prio-splb1 = <0x0>;
+ xlnx,mplb-read-pipe-enable = <0x1>;
+ xlnx,mplb-sync-tattribute = <0x0>;
+ xlnx,mplb-wdog-enable = <0x1>;
+ xlnx,mplb-write-pipe-enable = <0x1>;
+ xlnx,mplb-write-post-enable = <0x1>;
+ xlnx,num-dma = <0x0>;
+ xlnx,pir = <0xf>;
+ xlnx,ppc440mc-addr-base = <0x0>;
+ xlnx,ppc440mc-addr-high = <0x1fffffff>;
+ xlnx,ppc440mc-arb-mode = <0x0>;
+ xlnx,ppc440mc-bank-conflict-mask = <0x1800000>;
+ xlnx,ppc440mc-control = <0xf810008f>;
+ xlnx,ppc440mc-max-burst = <0x8>;
+ xlnx,ppc440mc-prio-dcur = <0x2>;
+ xlnx,ppc440mc-prio-dcuw = <0x3>;
+ xlnx,ppc440mc-prio-icu = <0x4>;
+ xlnx,ppc440mc-prio-splb0 = <0x1>;
+ xlnx,ppc440mc-prio-splb1 = <0x0>;
+ xlnx,ppc440mc-row-conflict-mask = <0x7ffe00>;
+ xlnx,ppcdm-asyncmode = <0x0>;
+ xlnx,ppcds-asyncmode = <0x0>;
+ xlnx,user-reset = <0x0>;
+ } ;
+ } ;
+ plb_v46_0: plb at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "xlnx,plb-v46-1.03.a", "simple-bus";
+ ranges ;
+ FLASH: flash at fc000000 {
+ bank-width = <2>;
+ compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash";
+ reg = < 0xfc000000 0x2000000 >;
+ xlnx,family = "virtex5";
+ xlnx,include-datawidth-matching-0 = <0x1>;
+ xlnx,include-datawidth-matching-1 = <0x0>;
+ xlnx,include-datawidth-matching-2 = <0x0>;
+ xlnx,include-datawidth-matching-3 = <0x0>;
+ xlnx,include-negedge-ioregs = <0x0>;
+ xlnx,include-plb-ipif = <0x1>;
+ xlnx,include-wrbuf = <0x1>;
+ xlnx,max-mem-width = <0x10>;
+ xlnx,mch-native-dwidth = <0x20>;
+ xlnx,mch-plb-clk-period-ps = <0x2710>;
+ xlnx,mch-splb-awidth = <0x20>;
+ xlnx,mch0-accessbuf-depth = <0x10>;
+ xlnx,mch0-protocol = <0x0>;
+ xlnx,mch0-rddatabuf-depth = <0x10>;
+ xlnx,mch1-accessbuf-depth = <0x10>;
+ xlnx,mch1-protocol = <0x0>;
+ xlnx,mch1-rddatabuf-depth = <0x10>;
+ xlnx,mch2-accessbuf-depth = <0x10>;
+ xlnx,mch2-protocol = <0x0>;
+ xlnx,mch2-rddatabuf-depth = <0x10>;
+ xlnx,mch3-accessbuf-depth = <0x10>;
+ xlnx,mch3-protocol = <0x0>;
+ xlnx,mch3-rddatabuf-depth = <0x10>;
+ xlnx,mem0-width = <0x10>;
+ xlnx,mem1-width = <0x20>;
+ xlnx,mem2-width = <0x20>;
+ xlnx,mem3-width = <0x20>;
+ xlnx,num-banks-mem = <0x1>;
+ xlnx,num-channels = <0x2>;
+ xlnx,priority-mode = <0x0>;
+ xlnx,synch-mem-0 = <0x0>;
+ xlnx,synch-mem-1 = <0x0>;
+ xlnx,synch-mem-2 = <0x0>;
+ xlnx,synch-mem-3 = <0x0>;
+ xlnx,synch-pipedelay-0 = <0x2>;
+ xlnx,synch-pipedelay-1 = <0x2>;
+ xlnx,synch-pipedelay-2 = <0x2>;
+ xlnx,synch-pipedelay-3 = <0x2>;
+ xlnx,tavdv-ps-mem-0 = <0x1adb0>;
+ xlnx,tavdv-ps-mem-1 = <0x3a98>;
+ xlnx,tavdv-ps-mem-2 = <0x3a98>;
+ xlnx,tavdv-ps-mem-3 = <0x3a98>;
+ xlnx,tcedv-ps-mem-0 = <0x1adb0>;
+ xlnx,tcedv-ps-mem-1 = <0x3a98>;
+ xlnx,tcedv-ps-mem-2 = <0x3a98>;
+ xlnx,tcedv-ps-mem-3 = <0x3a98>;
+ xlnx,thzce-ps-mem-0 = <0x88b8>;
+ xlnx,thzce-ps-mem-1 = <0x1b58>;
+ xlnx,thzce-ps-mem-2 = <0x1b58>;
+ xlnx,thzce-ps-mem-3 = <0x1b58>;
+ xlnx,thzoe-ps-mem-0 = <0x1b58>;
+ xlnx,thzoe-ps-mem-1 = <0x1b58>;
+ xlnx,thzoe-ps-mem-2 = <0x1b58>;
+ xlnx,thzoe-ps-mem-3 = <0x1b58>;
+ xlnx,tlzwe-ps-mem-0 = <0x88b8>;
+ xlnx,tlzwe-ps-mem-1 = <0x0>;
+ xlnx,tlzwe-ps-mem-2 = <0x0>;
+ xlnx,tlzwe-ps-mem-3 = <0x0>;
+ xlnx,twc-ps-mem-0 = <0x1adb0>;
+ xlnx,twc-ps-mem-1 = <0x3a98>;
+ xlnx,twc-ps-mem-2 = <0x3a98>;
+ xlnx,twc-ps-mem-3 = <0x3a98>;
+ xlnx,twp-ps-mem-0 = <0x11170>;
+ xlnx,twp-ps-mem-1 = <0x2ee0>;
+ xlnx,twp-ps-mem-2 = <0x2ee0>;
+ xlnx,twp-ps-mem-3 = <0x2ee0>;
+ xlnx,xcl0-linesize = <0x4>;
+ xlnx,xcl0-writexfer = <0x1>;
+ xlnx,xcl1-linesize = <0x4>;
+ xlnx,xcl1-writexfer = <0x1>;
+ xlnx,xcl2-linesize = <0x4>;
+ xlnx,xcl2-writexfer = <0x1>;
+ xlnx,xcl3-linesize = <0x4>;
+ xlnx,xcl3-writexfer = <0x1>;
+ } ;
+ Hard_Ethernet_MAC: xps-ll-temac at 81c00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "xlnx,compound";
+ ethernet at 81c00000 {
+ compatible = "xlnx,xps-ll-temac-1.01.b";
+ device_type = "network";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 8 2 >;
+ llink-connected = <&Hard_Ethernet_MAC_fifo>;
+ local-mac-address = [ 02 00 00 00 00 00 ];
+ reg = < 0x81c00000 0x40 >;
+ xlnx,bus2core-clk-ratio = <0x1>;
+ xlnx,phy-type = <0x3>;
+ xlnx,phyaddr = <0x1>;
+ xlnx,rxcsum = <0x0>;
+ xlnx,rxfifo = <0x8000>;
+ xlnx,temac-type = <0x0>;
+ xlnx,txcsum = <0x0>;
+ xlnx,txfifo = <0x8000>;
+ } ;
+ } ;
+ Hard_Ethernet_MAC_fifo: xps-ll-fifo at 81a00000 {
+ compatible = "xlnx,xps-ll-fifo-1.01.a";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 6 2 >;
+ reg = < 0x81a00000 0x10000 >;
+ xlnx,family = "virtex5";
+ } ;
+ IIC_EEPROM: i2c at 81600000 {
+ compatible = "xlnx,xps-iic-2.00.a";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 9 2 >;
+ reg = < 0x81600000 0x10000 >;
+ xlnx,clk-freq = <0x5f5e100>;
+ xlnx,family = "virtex5";
+ xlnx,gpo-width = <0x1>;
+ xlnx,iic-freq = <0x186a0>;
+ xlnx,scl-inertial-delay = <0x5>;
+ xlnx,sda-inertial-delay = <0x5>;
+ xlnx,ten-bit-adr = <0x0>;
+ } ;
+ LCD_OPTIONAL: gpio at 81420000 {
+ compatible = "xlnx,xps-gpio-1.00.a";
+ reg = < 0x81420000 0x10000 >;
+ xlnx,all-inputs = <0x0>;
+ xlnx,all-inputs-2 = <0x0>;
+ xlnx,dout-default = <0x0>;
+ xlnx,dout-default-2 = <0x0>;
+ xlnx,family = "virtex5";
+ xlnx,gpio-width = <0xb>;
+ xlnx,interrupt-present = <0x0>;
+ xlnx,is-bidir = <0x1>;
+ xlnx,is-bidir-2 = <0x1>;
+ xlnx,is-dual = <0x0>;
+ xlnx,tri-default = <0xffffffff>;
+ xlnx,tri-default-2 = <0xffffffff>;
+ } ;
+ LEDs_4Bit: gpio at 81400000 {
+ compatible = "xlnx,xps-gpio-1.00.a";
+ reg = < 0x81400000 0x10000 >;
+ xlnx,all-inputs = <0x0>;
+ xlnx,all-inputs-2 = <0x0>;
+ xlnx,dout-default = <0x0>;
+ xlnx,dout-default-2 = <0x0>;
+ xlnx,family = "virtex5";
+ xlnx,gpio-width = <0x4>;
+ xlnx,interrupt-present = <0x0>;
+ xlnx,is-bidir = <0x1>;
+ xlnx,is-bidir-2 = <0x1>;
+ xlnx,is-dual = <0x0>;
+ xlnx,tri-default = <0xffffffff>;
+ xlnx,tri-default-2 = <0xffffffff>;
+ } ;
+ RS232_Uart_1: serial at 83e00000 {
+ clock-frequency = <100000000>;
+ compatible = "xlnx,xps-uart16550-2.00.b", "ns16550";
+ current-speed = <9600>;
+ device_type = "serial";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 11 2 >;
+ reg = < 0x83e00000 0x10000 >;
+ reg-offset = <0x1003>;
+ reg-shift = <2>;
+ xlnx,family = "virtex5";
+ xlnx,has-external-rclk = <0x0>;
+ xlnx,has-external-xin = <0x0>;
+ xlnx,is-a-16550 = <0x1>;
+ } ;
+ SPI_EEPROM: xps-spi at feff8000 {
+ compatible = "xlnx,xps-spi-2.00.b";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 10 2 >;
+ reg = < 0xfeff8000 0x80 >;
+ xlnx,family = "virtex5";
+ xlnx,fifo-exist = <0x1>;
+ xlnx,num-ss-bits = <0x1>;
+ xlnx,num-transfer-bits = <0x8>;
+ xlnx,sck-ratio = <0x80>;
+ } ;
+ SysACE_CompactFlash: sysace at 83600000 {
+ compatible = "xlnx,xps-sysace-1.00.a";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 7 2 >;
+ reg = < 0x83600000 0x10000 >;
+ xlnx,family = "virtex5";
+ xlnx,mem-width = <0x10>;
+ } ;
+ plbv46_pci_0: plbv46-pci at 85e00000 {
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "xlnx,plbv46-pci-1.03.a";
+ device_type = "pci";
+ reg = < 0x85e00000 0x10000 >;
+ /* The default ML510 BSB has C_IPIFBAR2PCIBAR_0 set to 0 which means that a read/write to
+ * the memory mapped i/o region (which starts at 0xa0000000) for pci bar 0 on the plb side
+ * translates to 0.
+ * It is important to this value to 0xa0000000, so that inbound and outbound pci transactions
+ * work properly including DMA.
+ */
+ ranges = <0x02000000 0x00000000 0xa0000000 0xa0000000 0x00000000 0x20000000
+ 0x01000000 0x00000000 0x00000000 0xf0000000 0x00000000 0x00010000>;
+
+ #interrupt-cells = <1>;
+ interrupt-parent = <&xps_intc_0>;
+ interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IRQ mapping for pci slots and ALI M1533 periperhals. In total there are
+ * 5 interrupt lines connected to a xps_intc controller. Four of them are PCI
+ * IRQ A, B, C, D and which correspond to respectively xpx_intc 5, 4, 3 and 2.
+ * The fifth interrupt line is connected to the south bridge and this one
+ * uses irq 1 and is active high instead of active low.
+ *
+ * The M1533 contains various peripherals including AC97 audio, a modem, USB,
+ * IDE and some power management stuff. The modem isn't connected on the ML510
+ * and the power management core also isn't used.
+ */
+
+ /* IDSEL 0x16 / dev=6, bus=0 / PCI slot 3 */
+ 0x3000 0 0 1 &xps_intc_0 3 2
+ 0x3000 0 0 2 &xps_intc_0 2 2
+ 0x3000 0 0 3 &xps_intc_0 5 2
+ 0x3000 0 0 4 &xps_intc_0 4 2
+
+ /* IDSEL 0x13 / dev=3, bus=1 / PCI slot 4 */
+ /*
+ 0x11800 0 0 1 &xps_intc_0 5 0 2
+ 0x11800 0 0 2 &xps_intc_0 4 0 2
+ 0x11800 0 0 3 &xps_intc_0 3 0 2
+ 0x11800 0 0 4 &xps_intc_0 2 0 2
+ */
+
+ /* According to the datasheet + schematic ABCD [FPGA] of slot 5 is mapped to DABC.
+ * Testing showed that at least A maps to B, the mapping of the other pins is a guess
+ * and for that reason the lines have been commented.
+ */
+ /* IDSEL 0x15 / dev=5, bus=0 / PCI slot 5 */
+ 0x2800 0 0 1 &xps_intc_0 4 2
+ /*
+ 0x2800 0 0 2 &xps_intc_0 3 2
+ 0x2800 0 0 3 &xps_intc_0 2 2
+ 0x2800 0 0 4 &xps_intc_0 5 2
+ */
+
+ /* IDSEL 0x12 / dev=2, bus=1 / PCI slot 6 */
+ /*
+ 0x11000 0 0 1 &xps_intc_0 4 0 2
+ 0x11000 0 0 2 &xps_intc_0 3 0 2
+ 0x11000 0 0 3 &xps_intc_0 2 0 2
+ 0x11000 0 0 4 &xps_intc_0 5 0 2
+ */
+
+ /* IDSEL 0x11 / dev=1, bus=0 / AC97 audio */
+ 0x0800 0 0 1 &i8259 7 2
+
+ /* IDSEL 0x1b / dev=11, bus=0 / IDE */
+ 0x5800 0 0 1 &i8259 14 2
+
+ /* IDSEL 0x1f / dev 15, bus=0 / 2x USB 1.1 */
+ 0x7800 0 0 1 &i8259 7 2
+ >;
+ ali_m1533 {
+ #size-cells = <1>;
+ #address-cells = <2>;
+ i8259: interrupt-controller at 20 {
+ reg = <1 0x20 2
+ 1 0xa0 2
+ 1 0x4d0 2>;
+ interrupt-controller;
+ device_type = "interrupt-controller";
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ compatible = "chrp,iic";
+
+ /* The south bridge connection is active high */
+ interrupts = <1 3>;
+ interrupt-parent = <&xps_intc_0>;
+ };
+ };
+ } ;
+ xps_bram_if_cntlr_1: xps-bram-if-cntlr at ffff0000 {
+ compatible = "xlnx,xps-bram-if-cntlr-1.00.a";
+ reg = < 0xffff0000 0x10000 >;
+ xlnx,family = "virtex5";
+ } ;
+ xps_intc_0: interrupt-controller at 81800000 {
+ #interrupt-cells = <0x2>;
+ compatible = "xlnx,xps-intc-1.00.a";
+ interrupt-controller ;
+ reg = < 0x81800000 0x10000 >;
+ xlnx,num-intr-inputs = <0xc>;
+ } ;
+ xps_tft_0: tft at 86e00000 {
+ compatible = "xlnx,xps-tft-1.00.a";
+ reg = < 0x86e00000 0x10000 >;
+ xlnx,dcr-splb-slave-if = <0x1>;
+ xlnx,default-tft-base-addr = <0x0>;
+ xlnx,family = "virtex5";
+ xlnx,i2c-slave-addr = <0x76>;
+ xlnx,mplb-awidth = <0x20>;
+ xlnx,mplb-dwidth = <0x80>;
+ xlnx,mplb-native-dwidth = <0x40>;
+ xlnx,mplb-smallest-slave = <0x20>;
+ xlnx,tft-interface = <0x1>;
+ } ;
+ } ;
+} ;
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index bf5c7ff..cf706a7 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -171,6 +171,16 @@ config XILINX_VIRTEX440_GENERIC_BOARD
Most Virtex 5 designs should use this unless it needs to do some
special configuration at board probe time.
+config XILINX_ML510
+ bool "Xilinx ML510 Reference Design support"
+ depends on 44x
+ default n
+ select XILINX_VIRTEX_5_FXT
+ select PPC_PCI_CHOICE
+ select XILINX_VIRTEX_PCI if PCI
+ select PPC_INDIRECT_PCI if PCI
+ select PPC_I8259 if PCI
+
config PPC44x_SIMPLE
bool "Simple PowerPC 44x board support"
depends on 44x
diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile
index 01f51da..6793f4e 100644
--- a/arch/powerpc/platforms/44x/Makefile
+++ b/arch/powerpc/platforms/44x/Makefile
@@ -4,3 +4,4 @@ obj-$(CONFIG_EBONY) += ebony.o
obj-$(CONFIG_SAM440EP) += sam440ep.o
obj-$(CONFIG_WARP) += warp.o
obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o
+obj-$(CONFIG_XILINX_ML510) += ml510.o
diff --git a/arch/powerpc/platforms/44x/ml510.c b/arch/powerpc/platforms/44x/ml510.c
new file mode 100644
index 0000000..3e64f5a
--- /dev/null
+++ b/arch/powerpc/platforms/44x/ml510.c
@@ -0,0 +1,165 @@
+/*
+ * Xilinx ML510 Reference Design support, derived from
+ * the generic Xilinx Virtex 5 board support
+ *
+ * Copyright 2007 Secret Lab Technologies Ltd.
+ * Copyright 2008 Xilinx, Inc.
+ * Copyright 2009 Roderick Colenbrander
+ *
+ * The i8259 cascade code was derived from 86xx/pic.c which is copyrighted by Freescale Semiconductor, Inc.
+ * Xilinx ML510 PCI initialization code, derived from the Xilinx ML300/ML410 based board support.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/of_platform.h>
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/time.h>
+#include <asm/xilinx_intc.h>
+#include <asm/reg.h>
+#include <asm/ppc4xx.h>
+#ifdef CONFIG_PPC_I8259
+#include <asm/i8259.h>
+#endif
+#ifdef CONFIG_PCI
+#include <linux/pci.h>
+#endif
+#include "44x.h"
+
+static struct of_device_id xilinx_of_bus_ids[] __initdata = {
+ { .compatible = "simple-bus", },
+ { .compatible = "xlnx,plb-v46-1.00.a", },
+ { .compatible = "xlnx,plb-v46-1.02.a", },
+ { .compatible = "xlnx,plb-v34-1.01.a", },
+ { .compatible = "xlnx,plb-v34-1.02.a", },
+ { .compatible = "xlnx,opb-v20-1.10.c", },
+ { .compatible = "xlnx,dcr-v29-1.00.a", },
+ { .compatible = "xlnx,compound", },
+ {}
+};
+
+#ifdef CONFIG_PPC_I8259
+static void ml510_8259_cascade(unsigned int irq, struct irq_desc *desc)
+{
+ unsigned int cascade_irq = i8259_irq();
+ if (cascade_irq != NO_IRQ)
+ generic_handle_irq(cascade_irq);
+
+ /* Let xilinx_intc end the interrupt */
+ desc->chip->ack(irq);
+ desc->chip->unmask(irq);
+}
+
+static void __init ml510_setup_i8259_cascade(void)
+{
+ struct device_node *np, *cascade_node = NULL;
+ int cascade_irq;
+
+ /* Initialize i8259 controller */
+ for_each_node_by_type(np, "interrupt-controller")
+ if (of_device_is_compatible(np, "chrp,iic")) {
+ cascade_node = np;
+ break;
+ }
+
+ if (cascade_node == NULL) {
+ printk(KERN_DEBUG "Could not find i8259 PIC\n");
+ return;
+ }
+
+ cascade_irq = irq_of_parse_and_map(cascade_node, 0);
+ if (cascade_irq == NO_IRQ) {
+ printk(KERN_ERR "Failed to map cascade interrupt\n");
+ return;
+ }
+
+ i8259_init(cascade_node, 0);
+
+ of_node_put(cascade_node);
+ set_irq_chained_handler(cascade_irq, ml510_8259_cascade);
+}
+#endif /* CONFIG_PPC_I8259 */
+
+#ifdef CONFIG_PCI
+static int ml510_pci_exclude_device(struct pci_controller *hose, u_char bus, u8 devfn)
+{
+ if (bus != 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ else
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static void __devinit ali_quirk(struct pci_dev *dev)
+{
+ /* Enable the IDE controller */
+ pci_write_config_byte(dev, 0x58, 0x4c);
+ /* Assign irq 14 to the primary ide channel */
+ pci_write_config_byte(dev, 0x44, 0x0d);
+ /* Assign irq 15 to the secondary ide channel */
+ pci_write_config_byte(dev, 0x75, 0x0f);
+ /* Set the ide controller in native mode */
+ pci_write_config_byte(dev, 0x09, 0xff);
+
+ /* INTB = disabled, INTA = disabled */
+ pci_write_config_byte(dev, 0x48, 0x00);
+ /* INTD = disabled, INTC = disabled */
+ pci_write_config_byte(dev, 0x4a, 0x00);
+ /* Audio = INT7, Modem = disabled. */
+ pci_write_config_byte(dev, 0x4b, 0x60);
+ /* USB = INT7 */
+ pci_write_config_byte(dev, 0x74, 0x06);
+}
+DECLARE_PCI_FIXUP_EARLY(0x10b9, 0x1533, ali_quirk);
+#endif /* CONFIG_PCI */
+
+static int __init ml510_device_probe(void)
+{
+ of_platform_bus_probe(NULL, xilinx_of_bus_ids, NULL);
+
+ return 0;
+}
+machine_device_initcall(ml510, ml510_device_probe);
+
+static int __init ml510_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "xlnx,ml510-ref-design");
+}
+
+void virtex_pci_init(void);
+static void __init ml510_setup_arch(void)
+{
+#ifdef CONFIG_PCI
+ /* Register the host bridge */
+ virtex_pci_init();
+#endif /* CONFIG_PCI */
+}
+
+static void ml510_init_IRQ(void)
+{
+ xilinx_intc_init_tree();
+
+#ifdef CONFIG_PPC_I8259
+ /* The devices on the ALI M1553 south bridge are connected to an internal i8259 */
+ ml510_setup_i8259_cascade();
+ /* Program irq 7 (usb/audio), 14/15 (ide) to level sensitive */
+ outb(0xc0, 0x4d0);
+ outb(0xc0, 0x4d1);
+#endif /* CONFIG_PPC_I8259 */
+}
+
+define_machine(ml510) {
+ .name = "Xilinx ML510 Reference Design support",
+ .probe = ml510_probe,
+ .setup_arch = ml510_setup_arch,
+ .pci_exclude_device = ml510_pci_exclude_device,
+ .init_IRQ = ml510_init_IRQ,
+ .get_irq = xilinx_intc_get_irq,
+ .calibrate_decr = generic_calibrate_decr,
+ .restart = ppc4xx_reset_system,
+};
--
1.5.6.3
More information about the Linuxppc-dev
mailing list