sata device failed to IDENTIFY...

Timur Tabi timur at
Tue Apr 7 07:34:36 EST 2009

On Mon, Mar 23, 2009 at 3:07 AM, rizwan ahmad <rizwanamu at> wrote:
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
> ata1.00: qc timeout (cmd 0xec)
> ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)

I'm seeing the same exact thing on a Freescale MPC8610 HPCD board.
This happens only on 2.6.30.  It works fine on 2.6.29.

Unfortunately, my rootfs is on my SATA drive, so it will be a bit
difficult to boot and get an lspci output.

More information about the Linuxppc-dev mailing list