[PATCH] powerpc: Correct USB support for GE Fanuc SBC610

[Kumar Gala]

On Sep 29, 2008, at 7:35 AM, Martyn Welch wrote:

> Support for the SBC610 VPX Single Board Computer from GE Fanuc  
> (PowerPC
> MPC8641D).
>
> Fixup to correctly reconfigure USB, provided by an NEC uPD720101,  
> after
> device is reset. This requires a set of chip specific registers in the
> devices configuration space to be correctly written, enabling all  
> ports
> and switching the device to use an external 48-MHz Oscillator.
>
> Signed-off-by: Martyn Welch <martyn.welch at gefanuc.com>
> ---
>
> arch/powerpc/platforms/86xx/gef_sbc610.c |   17 +++++++++++++++++
> 1 files changed, 17 insertions(+), 0 deletions(-)

applied

- k