[PATCH v2] powerpc: implement support for MPC8349-compatible SOC GPIOs

[Anton Vorontsov]

On Fri, Sep 19, 2008 at 05:11:15PM +0200, Peter Korsgaard wrote:
> >>>>> "Anton" == Anton Vorontsov <avorontsov at ru.mvista.com> writes:
> 
> Hi,
> 
>  >> It seems basically the same as my patch (gpio driver for
>  >> mpc831x/mpc834x/mpc837x with OF bindings) from September 5th except
>  >> you don't have any documentation
> 
>  Anton> Well, do we really need documentation for every trivial gpio
>  Anton> controller? The bindings are the same, only different compatible
>  Anton> entries...
> 
> Well, we need some way of knowing that atleast. Having people grepping
> through arch/powerpc/boot/dts/ (and knowing that they should look for
> 8349 even though they might use 8313 or 8610) doesn't seem optimal to
> me - I take it that's why we created
> Documentation/powerpc/dts-bindings in the first place?

Ok.

>  Anton> If we do need the documentation for this, I can readily include it.
> 
>  >> and the Kconfig doesn't depend on
>  >> 831x/834x/837x.
> 
>  Anton> This is purposely. We also need support for 8610, and maybe
>  Anton> later we'll find another chip with the same unit. So, to not touch
>  Anton> the Kconfig for every new chip I just made it PPC32-wide. Other
>  Anton> option is to depend on FSL_SOC, but the driver really does not
>  Anton> depend on any fsl_soc stuff...
> 
> Adding another symbol to the Kconfig once it is verified that a new
> SoC is compatible doesn't seem like a big deal - Figuring out all the
> knobs we already have is, without having options for stuff that is
> known to be irrelevant for the SoC.
> 
> The other 83xx specific drivers also depend on PPC_83xx.

Lets wait for Kumar's comments. We've already had a PPC_* mess
for the USB_EHCI_FSL symbol. What I've learned from it, is that
huge PPC_* list isn't perfect either.

See this discussion:

http://www.mail-archive.com/linux-usb@vger.kernel.org/msg01926.html

And this one:

http://fixunix.com/kernel/397972-patch-1-4-spi-powerpc-spi_mpc83xx-handles-freescale-mpc8610-well.html

>  >> Why do you need this when you have the lock?
> 
>  Anton> See this discussion:
> 
>  Anton> http://www.mail-archive.com/linuxppc-dev@ozlabs.org/msg12299.html
> 
> Ahh, for open drain outputs. gpiolib doesn't actually provide an
> interface to put the gpios in that mode, but it could ofcause have
> been set up in the bootloader. I'll fix that and send an updated
> patch.

Pardon? Who will send an updated patch, and what patch exactly? ;-)

-- 
Anton Vorontsov
email: cbouatmailru at gmail.com
irc://irc.freenode.net/bd2