[PATCH v2] bootwrapper: support u-boot multi component images

[Grant Likely]

On Fri, Sep 19, 2008 at 10:50:10AM +0200, Peter Korsgaard wrote:
> From: peter Korsgaard <jacmet at sunsite.dk>
> 
> Support uImage.<platform>, which are U-Boot multi component images
> containing a kernel, dtb and possibly an initrd.
> 
> Signed-off-by: Peter Korsgaard <jacmet at sunsite.dk>
Acked-by: Grant Likely <grant.likely at secretlab.ca>

> ---
> v2: Incorporated Grant Likely's feedback.
> 
>  Documentation/powerpc/bootwrapper.txt |    4 ++++
>  arch/powerpc/boot/Makefile            |   11 +++++++++--
>  arch/powerpc/boot/wrapper             |   20 +++++++++++++++++++-
>  3 files changed, 32 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/powerpc/bootwrapper.txt b/Documentation/powerpc/bootwrapper.txt
> index d60fced..fa2e014 100644
> --- a/Documentation/powerpc/bootwrapper.txt
> +++ b/Documentation/powerpc/bootwrapper.txt
> @@ -91,6 +91,10 @@ Currently, the following image format targets exist:
>  			a device tree to the kernel at boot.  If using an older
>  			version of U-Boot, then you need to use a cuImage
>  			instead.
> +   uImage.%:		U-Boot multi component image. Similar to uImage,
> +			except device tree blob is embedded inside the
> +			image together with the kernel (and potentially
> +			an initrd).
>     zImage.%:		Image format which does not embed a device tree.
>  			Used by OpenFirmware and other firmware interfaces
>  			which are able to supply a device tree.  This image
> diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
> index 717a3bc..8d2e789 100644
> --- a/arch/powerpc/boot/Makefile
> +++ b/arch/powerpc/boot/Makefile
> @@ -282,8 +282,9 @@ image-y	+= $(subst ",,$(CONFIG_EXTRA_TARGETS))
>  initrd-  := $(patsubst zImage%, zImage.initrd%, $(image-n) $(image-))
>  initrd-y := $(patsubst zImage%, zImage.initrd%, \
>  		$(patsubst dtbImage%, dtbImage.initrd%, \
> +		$(patsubst uImage.%, uImage.initrd.%, \
>  		$(patsubst simpleImage%, simpleImage.initrd%, \
> -		$(patsubst treeImage%, treeImage.initrd%, $(image-y)))))
> +		$(patsubst treeImage%, treeImage.initrd%, $(image-y))))))
>  initrd-y := $(filter-out $(image-y), $(initrd-y))
>  targets	+= $(image-y) $(initrd-y)
>  
> @@ -316,6 +317,12 @@ $(obj)/zImage.iseries: vmlinux
>  $(obj)/uImage: vmlinux $(wrapperbits)
>  	$(call if_changed,wrap,uboot)
>  
> +$(obj)/uImage.initrd.%: vmlinux $(wrapperbits) $(obj)/%.dtb
> +	$(call if_changed,wrap,uboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
> +
> +$(obj)/uImage.%: vmlinux $(wrapperbits) $(obj)/%.dtb
> +	$(call if_changed,wrap,uboot-$*,,$(obj)/$*.dtb)
> +
>  $(obj)/cuImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
>  	$(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb)
>  
> @@ -352,7 +359,7 @@ install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y))
>  clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \
>  	zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \
>  	zImage.iseries zImage.miboot zImage.pmac zImage.pseries \
> -	otheros.bld *.dtb
> +	otheros.bld uImage* *.dtb
>  
>  # clean up files cached by wrapper
>  clean-kernel := vmlinux.strip vmlinux.bin
> diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
> index 965c237..548b087 100755
> --- a/arch/powerpc/boot/wrapper
> +++ b/arch/powerpc/boot/wrapper
> @@ -153,7 +153,7 @@ coff)
>      lds=$object/zImage.coff.lds
>      link_address='0x500000'
>      ;;
> -miboot|uboot)
> +miboot|uboot*)
>      # miboot and U-boot want just the bare bits, not an ELF binary
>      ext=bin
>      objflags="-O binary"
> @@ -262,6 +262,24 @@ uboot)
>      fi
>      exit 0
>      ;;
> +uboot-*)
> +    rm -f "$ofile"
> +    # we always need an initrd - create a dummy initrd if none provided
> +    if [ ! -f "initrd" ]; then
> +	initrd="$tmpdir/dummy.initrd"
> +	echo -n fill >$initrd
> +    fi
> +    mkimage -A ppc -O linux -T multi -C gzip -a $membase -e $membase \
> +	$uboot_version -d "$vmz:$initrd:$dtb" "$ofile"
> +    if [ "$initrd" == "$tmpdir/dummy.initrd" ]; then
> +	rm $initrd;
> +    fi
> +    if [ -z "$cacheit" ]; then
> +	rm -f "$vmz"
> +    fi
> +    exit 0
> +    ;;
> +
>  esac
>  
>  addsec() {
> -- 
> 1.5.6.3
>