dts file for ep8548A board
John Traill
john.traill at freescale.com
Tue Sep 16 19:44:11 EST 2008
Don't know if this helps but ..
The EP boards I've used have an old version of u-boot which don't support passing the device tree address so I've had to build a cuImage.
Cheers.
poornima r wrote:
> Hi all,
>
> I am working on ep8548A embedded planet board.
> I am using mpc8548cds dtb file (mpc8548cds.dts file in
> arch/powerpc/boot/dts directory of the kernel source) as my device tree
> file.
> I am tracing the kernel initilization path through BDI.
> The BDI tracing is hanging in early_init_devtree ( in machine_init
> function) if the r3 register (physical pointer to device tree block) is
> not set to dtb file loaded location in RAM.
> Once I set the r3 register manually in BDI (rm r3 <dtb file location>)
> the kernel is passing machine_init function (passing early_init_devtree(
> ) ).
> I tried to statically set r3 register in head_fsl_booke.S file by
> using ori instruction but I was not able to set the r3 value to dtb file
> RAM location.
> Are any changes necessary in mps8548cds.dts for ep8548A board?
> How do we and where should we set the r3 register value in
> head_fsl_booke.S file for device tree initilization?
>
> Thanks,
> Poornima
>
>
>
>
>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev at ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
--
John Traill
Systems Engineer
Network and Computing Systems Group
Freescale Semiconductor UK LTD
Colvilles Road
East Kilbride
Glasgow G75 0TG, Scotland
Tel: +44 (0) 1355 355494
Fax: +44 (0) 1355 261790
E-mail: john.traill at freescale.com
Registration Number: SC262720
VAT Number: GB831329053
[ ] General Business Use
[ ] Freescale Internal Use Only
[ ] Freescale Confidential Proprietary
More information about the Linuxppc-dev
mailing list