[PATCH] powerpc: fix interrupt values for DMA2 in MPC8610 HPCD device tree

[Timur Tabi]

The interrupt values in a device tree must be 16 greater than the actual
interrupt number for a given device.  The interrupt property for the DMA
channels for DMA2 in the MPC8610 HPCD device tree was using the raw values,
not the adjusted ones.

Signed-off-by: Timur Tabi <timur at freescale.com>
---

Kumar, I have no idea how this was missed for so long, but this patch is a
must-fix for 2.6.27.

 arch/powerpc/boot/dts/mpc8610_hpcd.dts |    8 ++++----
 1 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
index 3b3a106..584a4f1 100644
--- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts
+++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
@@ -281,7 +281,7 @@
 				cell-index = <0>;
 				reg = <0x0 0x80>;
 				interrupt-parent = <&mpic>;
-				interrupts = <60 2>;
+				interrupts = <76 2>;
 			};
 			dma-channel at 1 {
 				compatible = "fsl,mpc8610-dma-channel",
@@ -289,7 +289,7 @@
 				cell-index = <1>;
 				reg = <0x80 0x80>;
 				interrupt-parent = <&mpic>;
-				interrupts = <61 2>;
+				interrupts = <77 2>;
 			};
 			dma-channel at 2 {
 				compatible = "fsl,mpc8610-dma-channel",
@@ -297,7 +297,7 @@
 				cell-index = <2>;
 				reg = <0x100 0x80>;
 				interrupt-parent = <&mpic>;
-				interrupts = <62 2>;
+				interrupts = <78 2>;
 			};
 			dma-channel at 3 {
 				compatible = "fsl,mpc8610-dma-channel",
@@ -305,7 +305,7 @@
 				cell-index = <3>;
 				reg = <0x180 0x80>;
 				interrupt-parent = <&mpic>;
-				interrupts = <63 2>;
+				interrupts = <79 2>;
 			};
 		};
 
-- 
1.5.5