[PATCH] powerpc: gpio driver for mpc831x/834x/837x with OF bindings

Peter Korsgaard jacmet at sunsite.dk
Sat Sep 6 01:08:47 EST 2008


Structured similar to the existing QE GPIO support.

Signed-off-by: Peter Korsgaard <jacmet at sunsite.dk>
---
 .../powerpc/dts-bindings/fsl/83xx_gpio.txt         |   33 +++++
 arch/powerpc/sysdev/Kconfig                        |    9 ++
 arch/powerpc/sysdev/Makefile                       |    1 +
 arch/powerpc/sysdev/mpc83xx_gpio.c                 |  141 ++++++++++++++++++++
 4 files changed, 184 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/powerpc/dts-bindings/fsl/83xx_gpio.txt
 create mode 100644 arch/powerpc/sysdev/mpc83xx_gpio.c

diff --git a/Documentation/powerpc/dts-bindings/fsl/83xx_gpio.txt b/Documentation/powerpc/dts-bindings/fsl/83xx_gpio.txt
new file mode 100644
index 0000000..f43f048
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/fsl/83xx_gpio.txt
@@ -0,0 +1,33 @@
+GPIO controllers on MPC831x/834x/837x SoCs
+
+Every GPIO controller node must have #gpio-cells property defined,
+this information will be used to translate gpio-specifiers.
+
+Required properties:
+- compatible : "fsl,mpc8349-gpio"
+- #gpio-cells : Should be two. The first cell is the pin number and the
+  second cell is used to specify optional parameters (currently unused).
+ - interrupts : Interrupt mapping for GPIO IRQ (currently unused).
+ - interrupt-parent : Phandle for the interrupt controller that
+   services interrupts for this device.
+- gpio-controller : Marks the port as GPIO controller.
+
+Example of gpio-controller nodes for a MPC8349 SoC:
+
+	gpio1: gpio-controller at c00 {
+		#gpio-cells = <2>;
+		compatible = "fsl,mpc8349-gpio";
+		reg = <0xc00 0x100>;
+		interrupts = <74 0x8>;
+		interrupt-parent = <&ipic>;
+		gpio-controller;
+	};
+
+	gpio2: gpio-controller at d00 {
+		#gpio-cells = <2>;
+		compatible = "fsl,mpc8349-gpio";
+		reg = <0xd00 0x100>;
+		interrupts = <75 0x8>;
+		interrupt-parent = <&ipic>;
+		gpio-controller;
+	};
diff --git a/arch/powerpc/sysdev/Kconfig b/arch/powerpc/sysdev/Kconfig
index 72fb35b..d28c3c5 100644
--- a/arch/powerpc/sysdev/Kconfig
+++ b/arch/powerpc/sysdev/Kconfig
@@ -6,3 +6,12 @@ config PPC4xx_PCI_EXPRESS
 	bool
 	depends on PCI && 4xx
 	default n
+
+config MPC83xx_GPIO
+	bool "MPC83xx GPIO support"
+	depends on PPC_MPC831x || PPC_MPC834x || PPC_MPC837x
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	help
+	  Say Y here if you're going to use hardware that connects to the
+	  MPC831x/834x/837x GPIOs.
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index a90054b..ced5793 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_FSL_SOC)		+= fsl_soc.o
 obj-$(CONFIG_FSL_PCI)		+= fsl_pci.o $(fsl-msi-obj-y)
 obj-$(CONFIG_FSL_LBC)		+= fsl_lbc.o
 obj-$(CONFIG_FSL_GTM)		+= fsl_gtm.o
+obj-$(CONFIG_MPC83xx_GPIO)	+= mpc83xx_gpio.o
 obj-$(CONFIG_RAPIDIO)		+= fsl_rio.o
 obj-$(CONFIG_TSI108_BRIDGE)	+= tsi108_pci.o tsi108_dev.o
 obj-$(CONFIG_QUICC_ENGINE)	+= qe_lib/
diff --git a/arch/powerpc/sysdev/mpc83xx_gpio.c b/arch/powerpc/sysdev/mpc83xx_gpio.c
new file mode 100644
index 0000000..a8a132d
--- /dev/null
+++ b/arch/powerpc/sysdev/mpc83xx_gpio.c
@@ -0,0 +1,141 @@
+/*
+ * GPIOs on MPC831x/834x/837x
+ *
+ * Copyright (C) 2008 Peter Korsgaard <jacmet at sunsite.dk>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/gpio.h>
+
+#define GPIO_DIR	0x00
+#define GPIO_ODR	0x04
+#define GPIO_DAT	0x08
+#define GPIO_IER	0x0c
+#define GPIO_IMR	0x10
+#define GPIO_ICR	0x14
+
+struct mpc83xx_gpio_chip {
+	struct of_mm_gpio_chip mm_gc;
+	spinlock_t lock;
+};
+
+static inline struct mpc83xx_gpio_chip *
+to_mpc83xx_gpio_chip(struct of_mm_gpio_chip *mm)
+{
+	return container_of(mm, struct mpc83xx_gpio_chip, mm_gc);
+}
+
+static int mpc83xx_gpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
+	u32 bit = 1u << (31-gpio);
+
+	return !!(in_be32(mm->regs + GPIO_DAT) & bit);
+}
+
+static void mpc83xx_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
+	struct mpc83xx_gpio_chip *mpc83xx_gc = to_mpc83xx_gpio_chip(mm);
+	unsigned long flags;
+	u32 data, bit = 1u << (31-gpio);
+
+	spin_lock_irqsave(&mpc83xx_gc->lock, flags);
+
+	data = in_be32(mm->regs + GPIO_DAT);
+	if (val)
+		data |= bit;
+	else
+		data &= ~bit;
+	out_be32(mm->regs + GPIO_DAT, data);
+
+	spin_unlock_irqrestore(&mpc83xx_gc->lock, flags);
+}
+
+static int mpc83xx_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
+	struct mpc83xx_gpio_chip *mpc83xx_gc = to_mpc83xx_gpio_chip(mm);
+	unsigned long flags;
+	u32 bit = 1u << (31-gpio);
+
+	spin_lock_irqsave(&mpc83xx_gc->lock, flags);
+
+	out_be32(mm->regs + GPIO_DIR,
+		 in_be32(mm->regs + GPIO_DIR) & ~bit);
+
+	spin_unlock_irqrestore(&mpc83xx_gc->lock, flags);
+
+	return 0;
+}
+
+static int mpc83xx_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
+	struct mpc83xx_gpio_chip *mpc83xx_gc = to_mpc83xx_gpio_chip(mm);
+	unsigned long flags;
+	u32 bit = 1u << (31-gpio);
+
+	mpc83xx_gpio_set(gc, gpio, val);
+
+	spin_lock_irqsave(&mpc83xx_gc->lock, flags);
+	out_be32(mm->regs + GPIO_DIR,
+		 in_be32(mm->regs + GPIO_DIR) | bit);
+
+	spin_unlock_irqrestore(&mpc83xx_gc->lock, flags);
+
+	return 0;
+}
+
+static int __init mpc83xx_add_gpiochips(void)
+{
+	struct device_node *np;
+
+	for_each_compatible_node(np, NULL, "fsl,mpc8349-gpio") {
+		int ret;
+		struct mpc83xx_gpio_chip *mpc83xx_gc;
+		struct of_mm_gpio_chip *mm_gc;
+		struct of_gpio_chip *of_gc;
+		struct gpio_chip *gc;
+
+		mpc83xx_gc = kzalloc(sizeof(*mpc83xx_gc), GFP_KERNEL);
+		if (!mpc83xx_gc) {
+			ret = -ENOMEM;
+			goto err;
+		}
+
+		spin_lock_init(&mpc83xx_gc->lock);
+
+		mm_gc = &mpc83xx_gc->mm_gc;
+		of_gc = &mm_gc->of_gc;
+		gc = &of_gc->gc;
+
+		of_gc->gpio_cells = 2;
+		gc->ngpio = 32;
+		gc->direction_input = mpc83xx_gpio_dir_in;
+		gc->direction_output = mpc83xx_gpio_dir_out;
+		gc->get = mpc83xx_gpio_get;
+		gc->set = mpc83xx_gpio_set;
+
+		ret = of_mm_gpiochip_add(np, mm_gc);
+		if (ret)
+			goto err;
+		continue;
+err:
+		pr_err("%s: registration failed with status %d\n",
+		       np->full_name, ret);
+		kfree(mpc83xx_gc);
+		/* try others anyway */
+	}
+	return 0;
+}
+arch_initcall(mpc83xx_add_gpiochips);
-- 
1.5.6.3




More information about the Linuxppc-dev mailing list