[PATCH] POWERPC: Rename PTE_SIZE to HPTE_SIZE
Benjamin Herrenschmidt
benh at kernel.crashing.org
Fri Sep 5 08:38:37 EST 2008
On Wed, 2008-09-03 at 10:37 -0500, Becky Bruce wrote:
> It's the size of the hardware PTE; make that clear in the name.
>
> Signed-off-by: Becky Bruce <becky.bruce at freescale.com>
Acked-by: Benjamin Herrenschmidt <benh at kernel.crashing.org>
---
> ---
> arch/powerpc/mm/hash_low_32.S | 36 ++++++++++++++++++------------------
> 1 files changed, 18 insertions(+), 18 deletions(-)
>
> diff --git a/arch/powerpc/mm/hash_low_32.S b/arch/powerpc/mm/hash_low_32.S
> index b9ba7d9..c41d658 100644
> --- a/arch/powerpc/mm/hash_low_32.S
> +++ b/arch/powerpc/mm/hash_low_32.S
> @@ -285,7 +285,7 @@ Hash_bits = 12 /* e.g. 256kB hash table */
> Hash_msk = (((1 << Hash_bits) - 1) * 64)
>
> /* defines for the PTE format for 32-bit PPCs */
> -#define PTE_SIZE 8
> +#define HPTE_SIZE 8
> #define PTEG_SIZE 64
> #define LG_PTEG_SIZE 6
> #define LDPTEu lwzu
> @@ -342,8 +342,8 @@ _GLOBAL(hash_page_patch_A)
>
> /* Search the primary PTEG for a PTE whose 1st (d)word matches r5 */
> mtctr r0
> - addi r4,r3,-PTE_SIZE
> -1: LDPTEu r6,PTE_SIZE(r4) /* get next PTE */
> + addi r4,r3,-HPTE_SIZE
> +1: LDPTEu r6,HPTE_SIZE(r4) /* get next PTE */
> CMPPTE 0,r6,r5
> bdnzf 2,1b /* loop while ctr != 0 && !cr0.eq */
> beq+ found_slot
> @@ -353,9 +353,9 @@ _GLOBAL(hash_page_patch_A)
> _GLOBAL(hash_page_patch_B)
> xoris r4,r3,Hash_msk>>16 /* compute secondary hash */
> xori r4,r4,(-PTEG_SIZE & 0xffff)
> - addi r4,r4,-PTE_SIZE
> + addi r4,r4,-HPTE_SIZE
> mtctr r0
> -2: LDPTEu r6,PTE_SIZE(r4)
> +2: LDPTEu r6,HPTE_SIZE(r4)
> CMPPTE 0,r6,r5
> bdnzf 2,2b
> beq+ found_slot
> @@ -363,8 +363,8 @@ _GLOBAL(hash_page_patch_B)
>
> /* Search the primary PTEG for an empty slot */
> 10: mtctr r0
> - addi r4,r3,-PTE_SIZE /* search primary PTEG */
> -1: LDPTEu r6,PTE_SIZE(r4) /* get next PTE */
> + addi r4,r3,-HPTE_SIZE /* search primary PTEG */
> +1: LDPTEu r6,HPTE_SIZE(r4) /* get next PTE */
> TST_V(r6) /* test valid bit */
> bdnzf 2,1b /* loop while ctr != 0 && !cr0.eq */
> beq+ found_empty
> @@ -380,9 +380,9 @@ _GLOBAL(hash_page_patch_B)
> _GLOBAL(hash_page_patch_C)
> xoris r4,r3,Hash_msk>>16 /* compute secondary hash */
> xori r4,r4,(-PTEG_SIZE & 0xffff)
> - addi r4,r4,-PTE_SIZE
> + addi r4,r4,-HPTE_SIZE
> mtctr r0
> -2: LDPTEu r6,PTE_SIZE(r4)
> +2: LDPTEu r6,HPTE_SIZE(r4)
> TST_V(r6)
> bdnzf 2,2b
> beq+ found_empty
> @@ -409,11 +409,11 @@ _GLOBAL(hash_page_patch_C)
>
> 1: addis r4,r7,next_slot at ha /* get next evict slot */
> lwz r6,next_slot at l(r4)
> - addi r6,r6,PTE_SIZE /* search for candidate */
> - andi. r6,r6,7*PTE_SIZE
> + addi r6,r6,HPTE_SIZE /* search for candidate */
> + andi. r6,r6,7*HPTE_SIZE
> stw r6,next_slot at l(r4)
> add r4,r3,r6
> - LDPTE r0,PTE_SIZE/2(r4) /* get PTE second word */
> + LDPTE r0,HPTE_SIZE/2(r4) /* get PTE second word */
> clrrwi r0,r0,12
> lis r6,etext at h
> ori r6,r6,etext at l /* get etext */
> @@ -426,7 +426,7 @@ _GLOBAL(hash_page_patch_C)
> found_empty:
> STPTE r5,0(r4)
> found_slot:
> - STPTE r8,PTE_SIZE/2(r4)
> + STPTE r8,HPTE_SIZE/2(r4)
>
> #else /* CONFIG_SMP */
> /*
> @@ -452,7 +452,7 @@ found_slot:
> STPTE r5,0(r4)
> sync
> TLBSYNC
> - STPTE r8,PTE_SIZE/2(r4) /* put in correct RPN, WIMG, PP bits */
> + STPTE r8,HPTE_SIZE/2(r4) /* put in correct RPN, WIMG, PP bits */
> sync
> SET_V(r5)
> STPTE r5,0(r4) /* finally set V bit in PTE */
> @@ -562,8 +562,8 @@ _GLOBAL(flush_hash_patch_A)
> /* Search the primary PTEG for a PTE whose 1st (d)word matches r5 */
> li r0,8 /* PTEs/group */
> mtctr r0
> - addi r12,r8,-PTE_SIZE
> -1: LDPTEu r0,PTE_SIZE(r12) /* get next PTE */
> + addi r12,r8,-HPTE_SIZE
> +1: LDPTEu r0,HPTE_SIZE(r12) /* get next PTE */
> CMPPTE 0,r0,r11
> bdnzf 2,1b /* loop while ctr != 0 && !cr0.eq */
> beq+ 3f
> @@ -574,9 +574,9 @@ _GLOBAL(flush_hash_patch_A)
> _GLOBAL(flush_hash_patch_B)
> xoris r12,r8,Hash_msk>>16 /* compute secondary hash */
> xori r12,r12,(-PTEG_SIZE & 0xffff)
> - addi r12,r12,-PTE_SIZE
> + addi r12,r12,-HPTE_SIZE
> mtctr r0
> -2: LDPTEu r0,PTE_SIZE(r12)
> +2: LDPTEu r0,HPTE_SIZE(r12)
> CMPPTE 0,r0,r11
> bdnzf 2,2b
> xori r11,r11,PTE_H /* clear H again */
More information about the Linuxppc-dev
mailing list