[PATCH v5 0/2] powerpc: Board support for GE Fanuc SBC610

[Martyn Welch]

The following series implements basic board support for GE Fanuc's SBC610, a 
6U single board computer, based on Freescale's MPC8641D.

This series provides basic functionality:
- The board can boot with a serial console.
- Ethernet works, though the phys are polled.
- The PCI bus is scanned and sata functions.

Signed-off-by: Martyn Welch <martyn.welch at gefanuc.com>
---

Scott: Thanks for your feeback.

I have removed un-needed entries from of_bus_ids[] and added "simple-bus" compatible node to soc in the DTS.

Martyn

 arch/powerpc/boot/dts/gef_sbc610.dts     |  260 ++++++++++++++++++++++++++++++
 arch/powerpc/platforms/86xx/Kconfig      |    9 +
 arch/powerpc/platforms/86xx/Makefile     |    1 
 arch/powerpc/platforms/86xx/gef_sbc610.c |  149 +++++++++++++++++
 4 files changed, 418 insertions(+), 1 deletions(-)