Porting linux on PPC405 , XUPv2p board

[Vineeth]

Hi all,

I am trying to port Linux 2.6 on PPC405 processor.I have EDK 10.1,

Xilinx University program board (with Virtex II Pro device)

linux kernel from Xilinx git. (git.xilinx.com)

Cross Compiler (Croostool)

fdt.dts file generated by EDK using with help of Xilinx fdt
patch.(gen-device-tree-mhs file)

 

I could compile the kernel and could generate the zImage. 

I've downloaded the hardware bit file and then the zImage to the DDR SDRAM
on the board using Parallel 4 cable.

 

when i give the RUN command, this is what i get..

 

 

booting virtex

memstart=0x0

memsize=0x10000000

zImage starting: loaded at 0x00400000 (sp: 0x00578f1c)

Allocating 0x326564 bytes for kernel ...

gunzipping (0x00000000 <- 0x0040c000:0x005772bb)...done 0x3015c8 bytes

Linux/PowerPC load: console=ttyS0 ip=on root=/dev/ram

Finalizing device tree... flat tree at 0x40ad68

 

The booting process seems to be stopped after this. I the bootarguments i've
given are,

 

In dts file,

 

bootargs = "console=ttyS0 ip=off root=/dev/ram";

linux,stdout-path="/plb at 0/serial at 83e00000";

 

Please let me know if've missed smthing here..!

n any clue on the reason why the boor process seems to be hanged here !

 

Thanks in advance,

Vineeth

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/linuxppc-dev/attachments/20080904/d9788af2/attachment.htm>