Problems with PCI-E devices not being detected with switch

[Benjamin Herrenschmidt]

On Fri, 2008-10-17 at 09:54 -0500, Ayman El-Khashab wrote:
> Benjamin Herrenschmidt wrote:
> > On Thu, 2008-10-16 at 10:01 -0500, Ayman El-Khashab wrote:
> >> Benjamin Herrenschmidt wrote:
> >>> On Wed, 2008-10-15 at 10:47 -0500, Ayman El-Khashab wrote:
> >>> 
> >>> Note for people on CC: This is a problem on 460EX on a canyonland
> >>> using the 4x port. 
> >>> 
> > 
> > Ok, can you send me a full dmesg log with "debug" on the kernel
> > command line after adding a #define DEBUG 1 to the top of
> > drivers/pci/probe.c please ? (before the batch of #include).  
> > 
> 
> Yes, it is below.  I saw the #define DEBUG 1 turned on these messages
> below, but I am not sure how to verify that I correctly added the 
> "debug" to the kernel arguments.  (In u-boot I added them to the end
> of the ramargs variable)

It's ok. "debug" just makes those messages visible on the boot console,
'dmesg' always shows it all.

Ben.