MPC8321, ethernet and i2c problems after upgrade from 2.6.25 to 2.6.27

[Joakim Tjernlund]

On Mon, 2008-10-13 at 14:01 +0200, Joakim Tjernlund wrote:
> So I upgraded my tree for our custom mpc8321 boards.
> I2c and ethernet stopped working.
> 
> Ethernet: I am using the ucc_geth driver and now
> it seems like it won't TX any pkgs.
> ethtool -S eth0  shows that the RX countes are increasing but
> the TX ones stays a zero. 

The ethernet problem turned out to be .bd_mem_part = MEM_PART_MURAM
not working anymore.
The default .bd_mem_part = MEM_PART_SYSTEM works. No idea as
to what caused this though.

    Jocke