[PATCH 2/2] i2c: MPC8349E-mITX Power Management and GPIO expander driver

[Kumar Gala]

On Sep 23, 2008, at 9:13 AM, Anton Vorontsov wrote:

> On MPC8349E-mITX, MPC8315E-RDB and MPC837x-RDB boards there is a
> Freescale MC9S08QG8 (MCU) chip with the custom firmware
> pre-programmed. The chip is used to power-off the board by the
> software, and to control some GPIO pins.
>
> Signed-off-by: Anton Vorontsov <avorontsov at ru.mvista.com>
> ---
> drivers/i2c/chips/Kconfig            |   11 ++
> drivers/i2c/chips/Makefile           |    1 +
> drivers/i2c/chips/mcu_mpc8349emitx.c |  209 +++++++++++++++++++++++++ 
> +++++++++
> 3 files changed, 221 insertions(+), 0 deletions(-)
> create mode 100644 drivers/i2c/chips/mcu_mpc8349emitx.c

applied

- k