[PATCH] powerpc: make Freescale QE support a selectable Kconfig option
Timur Tabi
timur at freescale.com
Fri Oct 3 01:27:57 EST 2008
Modify the Kconfig so that Freescale QUICC Engine (QE) support is a selectable
option, thereby allowing users to compile kernels without any QE support.
The drawback is that QE support is now disabled by default on platforms that
have a QE, and so a defconfig is needed to enable QE and QE devices (like
UCC GETH). Fortunately, all the current relevant defconfigs do that already.
Signed-off-by: Timur Tabi <timur at freescale.com>
---
This patch should be applied to Kumar's branch for 2.6.28 patches.
arch/powerpc/platforms/83xx/Kconfig | 4 ----
arch/powerpc/platforms/Kconfig | 3 ++-
2 files changed, 2 insertions(+), 5 deletions(-)
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index 6159c5d..4a6cc78 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -19,7 +19,6 @@ config MPC831x_RDB
config MPC832x_MDS
bool "Freescale MPC832x MDS"
select DEFAULT_UIMAGE
- select QUICC_ENGINE
select PPC_MPC832x
help
This option enables support for the MPC832x MDS evaluation board.
@@ -27,7 +26,6 @@ config MPC832x_MDS
config MPC832x_RDB
bool "Freescale MPC832x RDB"
select DEFAULT_UIMAGE
- select QUICC_ENGINE
select PPC_MPC832x
help
This option enables support for the MPC8323 RDB board.
@@ -57,14 +55,12 @@ config MPC834x_ITX
config MPC836x_MDS
bool "Freescale MPC836x MDS"
select DEFAULT_UIMAGE
- select QUICC_ENGINE
help
This option enables support for the MPC836x MDS Processor Board.
config MPC836x_RDK
bool "Freescale/Logic MPC836x RDK"
select DEFAULT_UIMAGE
- select QUICC_ENGINE
select QE_GPIO
select FSL_GTM
select FSL_LBC
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 9578c45..6cf517f 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -239,7 +239,8 @@ config TAU_AVERAGE
If in doubt, say N here.
config QUICC_ENGINE
- bool
+ bool "Freescale QUICC Engine (QE) Support"
+ depends on FSL_SOC
select PPC_LIB_RHEAP
select CRC32
help
--
1.5.5
More information about the Linuxppc-dev
mailing list