[PATCH] powerpc/83xx: Fix MCU support merge issue in mpc8349emitx.dts

Anton Vorontsov avorontsov at ru.mvista.com
Fri Nov 28 04:36:45 EST 2008


Just found the merge issue in 442746989d92afc125040e0f29b33602ad94da99
("powerpc/83xx: Add support for MCU microcontroller in .dts files"):
the commit adds the MCU controller node into the DMA node, which is
wrong because the MCU sits on the I2C bus. Fix this by moving the MCU
node into the I2C controller node.

The original patch[1] was OK though. ;-)

[1] http://patchwork.ozlabs.org/patch/4895/

Signed-off-by: Anton Vorontsov <avorontsov at ru.mvista.com>
---
 arch/powerpc/boot/dts/mpc8349emitx.dts |   16 ++++++++--------
 1 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts
index 2c9d54a..4bdbaf4 100644
--- a/arch/powerpc/boot/dts/mpc8349emitx.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -91,6 +91,14 @@
 				interrupts = <18 0x8>;
 				interrupt-parent = <&ipic>;
 			};
+
+			mcu_pio: mcu at a {
+				#gpio-cells = <2>;
+				compatible = "fsl,mc9s08qg8-mpc8349emitx",
+					     "fsl,mcu-mpc8349emitx";
+				reg = <0x0a>;
+				gpio-controller;
+			};
 		};
 
 		spi at 7000 {
@@ -139,14 +147,6 @@
 				interrupt-parent = <&ipic>;
 				interrupts = <71 8>;
 			};
-
-			mcu_pio: mcu at a {
-				#gpio-cells = <2>;
-				compatible = "fsl,mc9s08qg8-mpc8349emitx",
-					     "fsl,mcu-mpc8349emitx";
-				reg = <0x0a>;
-				gpio-controller;
-			};
 		};
 
 		usb at 22000 {
-- 
1.5.6.5



More information about the Linuxppc-dev mailing list