[PATCH][v2] xsysace: use resource_size_t instead of unsigned long

Yuri Tikhonov yur at emcraft.com
Thu Nov 27 23:34:05 EST 2008


I'm sorry, but the patch I've just posted turn out to be corrupted. The
correct one is below.

---
Use resource_size_t for physical address of SystemACE
chip. This fixes the driver brokeness for 32 bit systems
with 64 bit resources (e.g. PPC440SPe).

Also this patch adds one more compatible string for more
clean description of the hardware, and fixes a sector_t-
related compilation warning.

Signed-off-by: Yuri Tikhonov <yur at emcraft.com>
Signed-off-by: Ilya Yanok <yanok at emcraft.com>
---
 drivers/block/xsysace.c |   24 +++++++++++++-----------
 1 files changed, 13 insertions(+), 11 deletions(-)

diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
index ecab9e6..9efd3d7 100644
--- a/drivers/block/xsysace.c
+++ b/drivers/block/xsysace.c
@@ -194,7 +194,7 @@ struct ace_device {
 	int in_irq;
 
 	/* Details of hardware device */
-	unsigned long physaddr;
+	resource_size_t physaddr;
 	void __iomem *baseaddr;
 	int irq;
 	int bus_width;		/* 0 := 8 bit; 1 := 16 bit */
@@ -628,8 +628,8 @@ static void ace_fsm_dostate(struct ace_device *ace)
 
 		/* Okay, it's a data request, set it up for transfer */
 		dev_dbg(ace->dev,
-			"request: sec=%lx hcnt=%lx, ccnt=%x, dir=%i\n",
-			req->sector, req->hard_nr_sectors,
+			"request: sec=%llx hcnt=%lx, ccnt=%x, dir=%i\n",
+			(unsigned long long)req->sector, req->hard_nr_sectors,
 			req->current_nr_sectors, rq_data_dir(req));
 
 		ace->req = req;
@@ -935,7 +935,8 @@ static int __devinit ace_setup(struct ace_device *ace)
 	int rc;
 
 	dev_dbg(ace->dev, "ace_setup(ace=0x%p)\n", ace);
-	dev_dbg(ace->dev, "physaddr=0x%lx irq=%i\n", ace->physaddr, ace->irq);
+	dev_dbg(ace->dev, "physaddr=0x%llx irq=%i\n",
+		(unsigned long long)ace->physaddr, ace->irq);
 
 	spin_lock_init(&ace->lock);
 	init_completion(&ace->id_completion);
@@ -1017,8 +1018,8 @@ static int __devinit ace_setup(struct ace_device *ace)
 	/* Print the identification */
 	dev_info(ace->dev, "Xilinx SystemACE revision %i.%i.%i\n",
 		 (version >> 12) & 0xf, (version >> 8) & 0x0f, version & 0xff);
-	dev_dbg(ace->dev, "physaddr 0x%lx, mapped to 0x%p, irq=%i\n",
-		ace->physaddr, ace->baseaddr, ace->irq);
+	dev_dbg(ace->dev, "physaddr 0x%llx, mapped to 0x%p, irq=%i\n",
+		(unsigned long long)ace->physaddr, ace->baseaddr, ace->irq);
 
 	ace->media_change = 1;
 	ace_revalidate_disk(ace->gd);
@@ -1035,8 +1036,8 @@ err_alloc_disk:
 err_blk_initq:
 	iounmap(ace->baseaddr);
 err_ioremap:
-	dev_info(ace->dev, "xsysace: error initializing device at 0x%lx\n",
-	       ace->physaddr);
+	dev_info(ace->dev, "xsysace: error initializing device at 0x%llx\n",
+		 (unsigned long long)ace->physaddr);
 	return -ENOMEM;
 }
 
@@ -1059,7 +1060,7 @@ static void __devexit ace_teardown(struct ace_device *ace)
 }
 
 static int __devinit
-ace_alloc(struct device *dev, int id, unsigned long physaddr,
+ace_alloc(struct device *dev, int id, resource_size_t physaddr,
 	  int irq, int bus_width)
 {
 	struct ace_device *ace;
@@ -1119,7 +1120,7 @@ static void __devexit ace_free(struct device *dev)
 
 static int __devinit ace_probe(struct platform_device *dev)
 {
-	unsigned long physaddr = 0;
+	resource_size_t physaddr = 0;
 	int bus_width = ACE_BUS_WIDTH_16; /* FIXME: should not be hard coded */
 	int id = dev->id;
 	int irq = NO_IRQ;
@@ -1165,7 +1166,7 @@ static int __devinit
 ace_of_probe(struct of_device *op, const struct of_device_id *match)
 {
 	struct resource res;
-	unsigned long physaddr;
+	resource_size_t physaddr;
 	const u32 *id;
 	int irq, bus_width, rc;
 
@@ -1205,6 +1206,7 @@ static struct of_device_id ace_of_match[] __devinitdata = {
 	{ .compatible = "xlnx,opb-sysace-1.00.b", },
 	{ .compatible = "xlnx,opb-sysace-1.00.c", },
 	{ .compatible = "xlnx,xps-sysace-1.00.a", },
+	{ .compatible = "xlnx,sysace", },
 	{},
 };
 MODULE_DEVICE_TABLE(of, ace_of_match);
-- 
1.5.6.1



More information about the Linuxppc-dev mailing list