[PATCH] powerpc: Use generic PHY driver for Marvell 88E1111 PHY on GE Fanuc SBC610

[Martyn Welch]

The Marvell PHY driver is currently being used for the 88E1111 on the
SBC610. This driver is causing the link to run in 10/Half mode, the generic
PHY driver is correctly configuring the PHY as 1000/Full.

Edit default config to use generic PHY driver.
---

 arch/powerpc/configs/86xx/gef_sbc610_defconfig |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
index 2da13e0..07ccaf8 100644
--- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
@@ -838,7 +838,7 @@ CONFIG_PHYLIB=y
 #
 # MII PHY device drivers
 #
-CONFIG_MARVELL_PHY=y
+# CONFIG_MARVELL_PHY is not set
 # CONFIG_DAVICOM_PHY is not set
 # CONFIG_QSEMI_PHY is not set
 # CONFIG_LXT_PHY is not set