[PATCH] mpc832x_rdb: fix swapped ethernet ids

[David Gibson]

On Thu, Nov 13, 2008 at 10:18:28AM -0500, Michael Barkowski wrote:
> ethernet0 (called FSL UEC0 in U-Boot) should be enet1 (UCC3/eth1), and
> ethernet1 should be enet0 (UCC2/eth0), to be consistent with U-Boot so
> that the interfaces do not swap addresses when control passes from
> U-Boot to the kernel.

Um.. why is just swapping the aliases, rather than the enet labels the
right approach here?

> diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
> index 226ff06..dea3091 100644
> --- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
> +++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
> @@ -18,8 +18,8 @@
> 	#size-cells = <1>;
>
> 	aliases {
> -		ethernet0 = &enet0;
> -		ethernet1 = &enet1;
> +		ethernet0 = &enet1;
> +		ethernet1 = &enet0;
> 		serial0 = &serial0;
> 		serial1 = &serial1;
> 		pci0 = &pci0;
>
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev at ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
>

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson