[PATCH] usb/fsl_qe_udc: Report disconnect before unbinding
Anton Vorontsov
avorontsov at ru.mvista.com
Thu Nov 13 07:12:18 EST 2008
On Wed, Nov 12, 2008 at 10:59:16PM +0300, Anton Vorontsov wrote:
[...]
> > And wouldn't it be better to _skip_ doing this if the gadget wasn't
> > connected before?
>
> Composite framework handles this. If there were no connections,
> then the disconnect() is a nop (except the spin lock/unlock pair).
>
> I'm not sure how the controller driver could tell if there
> was a connection or not: it doesn't operate these terms.
> What the udc controller knows is: how to report bus reset
> and how to receive or transmit the data...
It seems I lied. Did you mean something like this patch?
diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c
index c7de671..fd44cf4 100644
--- a/drivers/usb/gadget/fsl_qe_udc.c
+++ b/drivers/usb/gadget/fsl_qe_udc.c
@@ -2368,6 +2368,9 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
/* stop usb controller, disable intr */
qe_usb_disable();
+ if (udc->usb_state == USB_STATE_DEFAULT)
+ goto skip_quiesce;
+
/* in fact, no needed */
udc_controller->usb_state = USB_STATE_ATTACHED;
udc_controller->ep0_state = WAIT_FOR_SETUP;
@@ -2385,6 +2388,7 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
/* report disconnect; the driver is already quiesced */
driver->disconnect(&udc_controller->gadget);
+skip_quiesce:
/* unbind gadget and unhook driver. */
driver->unbind(&udc_controller->gadget);
udc_controller->gadget.dev.driver = NULL;
More information about the Linuxppc-dev
mailing list