[PATCH]: [MPC5200] Add ATA DMA support
Matt Sealey
matt at genesi-usa.com
Wed Nov 12 01:35:51 EST 2008
Oddly I built 2.6.27.2 with the patch and the Efika "waited" for a disk to appear
and didn't get anywhere. If I set libata.dma=0 then it complained about missing
symbols (but not with it enabled!).
This was a clean SUSE kernel from Factory, with only the ATA patch applied with
a few hand-merges (pata_mpc52xx.c has had a line of whitespace removed at some
point, but otherwise identical).
Lehmann, Hans (Ritter Elektronik) wrote:
> Tim, Grant,
>
> I have tested the patch on our MPC5200B based board with Kingston Elite Pro CF-card and it worked fine with DMA2. I have port the patch back to 2.6.24.7 Kernel and I can't detect problems our errors, even with big files (40 mB) over FEC wich I save to card . We get performance up to 10,5mB/s which is near to the max. speed.
>
> Greetings
>
>
>
>
> Mit freundlichen Grüßen
>
> Hans Lehmann
> Softwareentwicklung
>
> Telefon +49 (0)2191-67-2520
> Fax +49 (0)2191-67-703408
> e-mail hans.lehmann at ritter-elektronik.de
>
>
>
> Ritter Elektronik GmbH
> Leverkuser Straße 65
> D-42897 Remscheid
> www.ritter-elektronik.de
>
> Geschäftsführer: Manfred A. Wagner, Dr. Uwe Baader
> Sitz der Gesellschaft: Oberhausen
> HRB 17168 Duisburg / USt-ID DE 814009849
>
>
> -----Ursprüngliche Nachricht-----
> Von: linuxppc-dev-bounces+hans.lehmann=ritter-elektronik.de at ozlabs.org [mailto:linuxppc-dev-bounces+hans.lehmann=ritter-elektronik.de at ozlabs.org] Im Auftrag von Tim Yamin
> Gesendet: Mittwoch, 13. August 2008 11:07
> An: Grant Likely
> Cc: linuxppc-dev at ozlabs.org
> Betreff: [WW Spam: medium] Re: [PATCH]: [MPC5200] Add ATA DMA support
>
> On Wed, Aug 13, 2008 at 7:11 AM, Grant Likely <grant.likely at secretlab.ca> wrote:
>> Sounds good to me. You will get more testers that way. I can pick it
>> up for -next if everything else looks good.
>
> Here are the new patches; tested against 2.6.27-rc3.
>
> Thanks,
>
> Tim
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev at ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
--
Matt Sealey <matt at genesi-usa.com>
Genesi, Manager, Developer Relations
More information about the Linuxppc-dev
mailing list