[PATCH 4/7] [POWERPC] QE: implement support for the GPIO LIB API

[Anton Vorontsov]

On Tue, May 27, 2008 at 07:16:28PM +0400, Anton Vorontsov wrote:
> On Tue, May 27, 2008 at 10:04:20AM -0500, Kumar Gala wrote:
> >
> > On May 23, 2008, at 11:39 AM, Anton Vorontsov wrote:
> >
> >> This is needed to access QE GPIOs via Linux GPIO API.
> >>
> >> Signed-off-by: Anton Vorontsov <avorontsov at ru.mvista.com>
> >> Acked-By: Timur Tabi <timur at freescale.com>
> >> ---
> >> Documentation/powerpc/booting-without-of.txt |   27 +++++
> >> arch/powerpc/sysdev/qe_lib/Kconfig           |    9 ++
> >> arch/powerpc/sysdev/qe_lib/Makefile          |    1 +
> >> arch/powerpc/sysdev/qe_lib/gpio.c            |  148 +++++++++++++++++ 
> >> +++++++++
> >> include/asm-powerpc/qe.h                     |    2 +
> >> 5 files changed, 187 insertions(+), 0 deletions(-)
> >> create mode 100644 arch/powerpc/sysdev/qe_lib/gpio.c
> >
> > didn't we talk about putting this is drivers/gpio/ ?
> 
> :-)
> 
> Yes, we did. And David Brownell politely suggested to not do this,
> and instead leave it in arch/ as do all other arches for their SOC
> GPIOs.

Ping?

-- 
Anton Vorontsov
email: cbouatmailru at gmail.com
irc://irc.freenode.net/bd2